Tag Archives: SECR P class 0-6-0t

Making Quay Changes #6 heading South East

This is the sixth in a series of ‘Making Quay Changes’ posts with the Canute Road Quay being transported to either a different location or era or both.  It follows my Making Quay Changes #1 post moving the scene Eastwards, and then back to Southampton with my Making Quay Changes #2 post but in the 1950s ,  #3 post set in the 1920/30s, #4 Being Industrious and #5 the 07 diesels take over. We now move to the South East with ex SECR motive power being utilised.

The P Class No.1558 from Hattons shunts at the quay

The T Class No. 1604 0-6-0T simmers in the background

The P class and T class meet on the Quay and shows the diminutive size of the P class

The LCDR T Class arrives as the quay.

The SER 0-40CT No. 1302 waits its next duty

The P class No. 1558 is about to depart

A busy moment at the quay

Although my usual modelling genre, as regular readers will know, is the Southern Railway between 1946 and 1949, however due to Canute Road Quay has very few visual references to either period or location (yes there are a couple, but hey…) It therefore allows me to change the location and era with different rolling stock, vehicles and details.

For this post we have stayed at Canute Road Quay‘s usual time frame but moved its location slightly. Having deliberately when building Canute Road Quay left the vehicles and other details such as crates, sack stacks and oil drums etc. loose, it enables them to be both be moved around, to give some variety in photographs, and or replaced with other items to different periods.

In this case Canute Road Quay‘s has been transported further to the South East, perhaps through squinted eyes it could on the Medway at Rochester, or or the Channel coast at Richborough Port or Newhaven Harbour perhaps…

The steam locomotives include the Hattons ex SECR P class 0-6-0T, an ex London, Chatham and Dover Railway Kirtey T Class 0-6-0T and even my South Eastern Railway 0-4-0CT crane tank makes an appearance.

The T class 0-6-0T were a class of ten locomotives introduced by the LC&DR (prior to the formation of the South, Eastern and Chatham Railway in 1899) between 1879 and 1893 specifically for shunting duties, with appropriately one of the class being initially used at Dover Docks. Although withdraws started in 1932 two of the class  1602 and 1604 (as my model) lasted until July 1951 and November 1950 respectively. My model is white metal and built from a Q Kit.

The SER 0-4-0CT crane tank number 1302 as per my model, was one of two built for the SER by Neilson in 1881. Like the T class she had worked at Dover Docks and also Richborough although she saw out most of her life at Lancing and Stewarts Lane. She was withdrawn in July 1949 and scrapped at Ashford. My model is built from a South Eastern Finecast white metal kit.

I hope you enjoy this post, the next ‘Making Quay Changes’ post with Canute Road Quay may or may not be set in its usual location, so once again, where and what era will it be…?

 

 

Model Railway Awards for 2018, like buses two come along at once, vote now, vote Southern of course… (and a bit of a shameless plug!)

It’s the start of 2019 and two separate votes for UK Model Railway Awards have opened.

Voting for the 2018 British Model Railways Awards promoted on RMweb and British Railways Modelling Magazine is now live and open for voting until 20th January with the winners being announced in the Spring edition of British Railways Modelling Magazine and on RMweb.

As well as giving you the chance to vote for your favourite models and manufacturers of 2018, the categories also celebrate excellence and innovation in the wider British model railway scene such as websites, retailers and exhibitions.

Also voting has also opened in the Model Rail Magazine Model of the Year 2018 (MOTY) which is live until January 18th 

There have of course been a number of excellent Southern / Southern Region related models released during 2018  so I urge you to support the production of these models by choosing your best in the relevant category and voting accordingly. These Southern models are as follows:

N Gauge:

  • Dapol Maunsell Brake Third Coach

00 Gauge

I am also very humbled to see that this little corner of the blogosphere of mine has once again been nominated in the British Model Railways Awards (it was voted 6th in last years awards) within the website of the year category, so and this is a bit of a, well a big, shameless plug, please feel free to vote for it, if you have enjoyed my ramblings over the last twelve months.

Also if like me you have received excellent service from a particular retailer such as Kernow Model Rail Centre please also vote accordingly.

Please make sure you vote counts to support the Southern / Southern Region models that have been produced in 2018 by voting here in the British Model Railway Awards open until the end of Sunday 20th January   and by voting here in the Model Rail Magazine Model of the Year (MOTY) open until Friday 18th January.

Here endeth the shameless plug(s)….

 

 

 

 

Hatton’s announce four more SECR P Class 0-6-0t versions

Following on from the release earlier this year of their delightful SECR P Class 0-6-0t Hatton’s have today announced that four new versions of the SECR P Class will soon be available. Based on feedback from the modelling community, Hatton’s will be producing extra SECR lined green and BR liveries, with new running numbers; and for the first time they will produce two ROD (Railway Operating Division) locomotives.
Production sample locomotives have been approved and they are on the way to their store now.

The four new versions of the Hatton’s P Class

The four new variants are:

  • H4-P-013 – 5027 in ROD green
  • H4-P-014 – 5753 in ROD green
  • H4-P-015 – 27 in SE&CR full lined green (with polished brass)
  • H4-P-016 – 31556 in BR black with early emblem

ROD Version No. 5027

The ‘ROD’ liveried P Classes were sent to Boulogne for a few years during WW1 for shunting at dockyards. On return to the UK, they were also seen working at Dover and Folkestone. These WW1-era locos will be perfect for a variety of UK or continental wartime layouts.

SECR Livery version No. 27

The SECR liveried locomotive will feature a new colour for the polished brass dome and safety valve. The new colour represents polished brass, which is halfway between our original release of P Classes 178 & 753; and Hornby’s H Class.

The new locomotives will be available on Friday 17th August 2018 for the same price of £99. All four are available to pre-order from Hatton’s now!

The countdown to Railex exhibition, preparation is quay and some from the Workbench Witterings

It is now less than two week to go to Canute Road Quay’s appearance at the excellent Railex exhibition organised by friends at the Princes Risborough and District MRC, being held at Stoke Mandeville Stadium, Stadium Approach, Aylesbury, Bucks, HP21 9PP on the 26th and 27th May  and I have been busy with final preparations.

An overall view of Canute Road Quay. Picture copyright and courtesy C Nevard and Model Rail

Even with a small layout like Canute Road Quay good preparation is required to ensure things go as smoothly, and just as importantly enjoyably, at the show. Canute Road Quay being only 5ft x 1 ft is somewhat easier to load and set up at a show than Fisherton Sarum but the steps for getting ready for a show are pretty much the same. The preparations, some are more obvious than others, include the following:

  • preparing packing the stock being taken and just as importantly in my case deciding what stock not to take!
  • track and stock cleaning, to ensure good reliable and slow speed running
  • checking coupling heights and uncoupler operation
  • general layout cleaning and dusting etc.
  • preparing and packing the loose detailing items (vehicles and packing crates etc.)
  • layout ancillaries, including:  transformer box, cables, lighting transformers, trestle supports, extension leads, curtains, spare controller, name badges, and relevant tools
  • operator comforts including: high stool, mugs (for the all important tea) and sweets and snacks (to keep up energy levels and act as a bribe for my fellow operator(s))
  • paperwork: show information and layout information sheets for prospecting exhibition managers
  • arranging operators to assist me at the show, somewhat easier with Canute Road Quay (in this case just the the one, in in the form of  friend and fellow modeller Simon Paley), than the larger number required for Fisherton Sarum!
  • overnight bag, if required, but not in the case of Railex as it is only 20 minutes from home

The revised fiddle yard arrangement the split cassettes feed arm can be seen

I have also made a small change to the way the cassettes in the off scene fiddle yard (a grand title for what is really just a shelf…) are handled and the electric feed provided. This is to make it easier to connect the cassette as previously I had two phosphor bronze spring clips fixed to the base which both provided the power feed to the aluminium section on each side and also ensured correct  alignment with the exit road. This arrangement also meant that the cassettes had to be aligned and slid in from the left hand end which was not all that practical due to the overrun protection at that side of the yard.

A closer view of the power feed arm and spring clip

I have now changed the nearest power feed and cassette alignment clip to be on a small lifting arm made from a suitable shaped piece of wood, complete with a nice little brass drawer handle. This enables the spring clip to be moved upwards and out of the way of the side of the cassette.
This arrangement now gives two advantages: firstly the cassettes can slid in and aligned easier from the front operating position; and secondly means that even with cassette in position the arm can be lifted isolating the cassette, where previously the cassette was live when the layout feed it adjoins to was live.

The feed arm in the up position

The cassettes I am using on Canute Road Quay, as I have mentioned before on this blog, are the 12″ loco cassettes from Fisherton Sarum and the some of these are made up on one side with two 6″ lengths of aluminium angle which I bridge electronically with a bulldog type clip and this allows for further isolation of a tank locomotive at the far end of the cassette.

Further to my previous post here about visitors to the quay  I have making some changes and or finishing touches to a couple of the locos in my fleet which may make and appearance the weekend, both are examples of the latest releases from Hatton’s in the shape of their delightful ex SECR P class 0-6-0t,  see my review here, and also their 14″ Andrew Barclay

A Hatton’s P Class now detailed and weathered

The P Class No 1558 already suiting my 1946 to 1949 modelling period being in post war SR black with ‘Sunshine’ style lettering has had crew fitted (in case the excellent ModelU 3D printed examples produced by Hatton’s specifically to fit the P Class), real coal added to the bunker and has been weathered.

The modified and weathered Hatton’s Andrew Barclay

My Hatton’s Andrew Barclay 14″ 0-4-0t has now been modified by replacing the existing buffers with wooden dumb buffers. The original standard buffers simply pull out and then the area of the bufferbeam filled flat to remove the rivet head detail. The wooden dumb buffers have been fashioned from rectangular plastic rod and suitably painted.

A further view of the Andrew Barclay

I have removed the original WTT branding in my usual way by rubbing with a cotton bud loaded with enamel thinners. As coal bunker space is pretty non-existent on these locomotives, having seen it photographs of the real thing added a couple of sacks of spare coal on just inside the cab and the other balanced on the running plate.  She has then been weathered to represent a pretty unkempt condition of such locomotives that were used on some of the other lines and private wharfs that existed in and around Southampton  area especially along the River Itchen. Like the P Class crew has been added using the ModelU 3D printed examples produced by Hatton’s.

If you are planning to visit Railex please make sure you come and say hello. I am stand 61, towards the right hand back corner (as you come into the hall)

 

Canute Road Quay has a few visitors, including latest @hattonsmodels releases, but normal service is resumed after; and preparation for Railex

It has been a busy period recent both in the arrival of some new ready to run models such as the Hatton’s ex SECR P class 0-6-0t,  see my review here, and also their 14″ Andrew Barclay along with some time spent applying some finishing decals prior to weathering of a couple of kit built models namely the ex LBSC D1  0-4-2t and ex SECR S Class 0-6-0st. All these models still require a little work, including in some cases repainting and numbering and also weathering. Some of you may have seen some of these pictures before on my twitter feed. 

SECR P Class 754 in WW1 grey livery

With the arrival of the Hatton’s P class I took the opportunity to temporarily move the location of Canute Road Quay further South east and backdate to earlier than my usual 1946-49 modelling period, including some of my earlier style wagons that do not usually get an outing. It is one of the advantages of having such a layout that has no real identifiable items to identify the actual time period.

ex SECR P Class 1555

Eventually to suit my preferred time period: No. 754 will be repainted and numbered to become  her later identity of No. 1557 in SR post war black livery, being one of the first two built with the slightly higher cab; whilst No. 1555 will be renumbered and lettered as No. 31555 with full ‘British Railways’ Sunshine lettering to represent her condition in early 1948.

ex LBSC D1 Class No. 2357

The ex LBSC D1 0-4-2t is built from a South Eastern Fincast white metal kit. In fact a couple of examples of the class, including No. 2286 are know to have been used at Southampton docks for a while in mid 1930s up to WW2 so I am not actually stretching history too far by running my model of no. 2357 on Canute Road Quay albeit in a slightly later post war-time period, although she was technically allocated to Ashford at the time so she is obviously on loan.

Andrew Barclay 14″ before being modified with wooden dumb buffers and weathered

The Hatton’s Andrew Barclay 14″ 0-6-0t will be modified to replace the existing buffers with wooden dumb buffers, have the WTT branding stripped off and suitably weathered to represent the condition of such locomotives that were used on some of the other lines and private wharfs that existed in and around Southampton  area especially along the River Itchen.
I also have a Hornby Peckett on order, that I will likewise modify with wooden dumb buffers to give some further variety to locomotives at Canute Road Quay and differ from the standard RTR versions. I will post details of this conversion in due course.

ex SECR S Class No. 1685

The ex SECR S Class 0-6-0 saddle tank No. 1685 is also built from South Eastern Fincast white metal kit. The S Class was in fact only one locomotive due to a requirement for a heavy shunter at Richborough Port during WW1 and so was converted from a C Class 0-6-0 tender locomotive, after the war she was transferred to Bricklayers Arms until withdrawal in 1951. Like the ex LBSC D1 she must be on load to Canute Road Quay.

ex LSWR B4 Class No. 100

With Canute Road Quay’s appearance looming at the excellent Railex exhibition organised by friends at the Princes Risborough and District MRC, being held at Stoke Mandeville Stadium, Stadium Approach, Aylesbury, Bucks, HP21 9PP on the 26th and 27th May 

USA Tank No. 70

I have started to return Canute Road Quay to its intended Southampton-ish location and the ex LSWR B4 0-4-0 and USA 0-6-0 tanks have returned along with suitable rolling stock and uncouplers etc all wheel cleaned, tried and tested in readiness for what I know will be an enjoyable weekend playing trains, shunting and talking.

USA Tank No.68

If you are planning to visit Railex please make sure you come and say hello. I am stand 61, towards the right hand back corner (as you come into the hall) and will ably assisted by friend and fellow modeller Simon Paley for the weekend, he being the much younger looking operator!

I hope this post has been of interest and as stated above it does show the advantages of having a layout that is not an actual real location but endeavours to capture a flavour and also is not easily identifiable to a specific time period. I also intend to occasionally run in a later 1960s period with a few diesel shunters so more on this in a future post.