Tag Archives: T Class 0-6-0T

Canute Road Quay, Rolling Stock, Techniques, Workbench, Workbench Witterings

Workbench Witterings#14 A quick brake… in 3D a SECR Diagram 1558

6 Comments

One of those occasions when looking for an item you come across something else purchased a while back and think I should really finish it… The other weekend I found my 3D print, purchased from Simon Dawson’s store on Shapeways (in those days when it was much cheaper than it is now…), of the 6 wheel ex SECR Diagram 1558 20 ton brake van, so I decide it would make a nice quick win project and be one less thing on the things to do one day list/pile…

The D1558 brake van is shunted at Canute Road Quay by an ex LCDR T class 0-6-0t

Forty 6 wheel 20t brake vans were built in 1898 by the South Eastern and Chatham Railway to Diagram 1558, these had an open veranda platform (i.e. with no roof, sides or end rail) at one end and a closed one at the other. In 1910, 50 more were built with close verandas at each end, between 1914 and 1920 the original vans were modified with two closed verandas. These modified vans were identifiable as had double top rails at the rebuilt end only.  All 90 vans entered Southern Railway stock and most passed into British Railways ownership. There were also variations in some of the framing, planking and handrails between the two built versions.

Buffers heads, handrails and lamp irons added
Brass bearings fitted and the ‘T’ section to support the weighted floor is added to the inside of both sides.
A dusting of Halfords plastic primer. The double top rail at the modified closed veranda end can be seen.
Painting and lettering complete, some etched brake gear will be added in due to finish

The one piece 3D print represents one of the first batch as modified with both verandas enclosed and correctly has the double end top rails at one end only. The print is pretty basic but was quite a clean print, has no floor, and is missing some of the fine top corner strapping detail. Handrails and lamp irons are thankfully not part of the print as I would have replaced these if they were. I replaced the printed bufferheads with finer turned metal 13″ versions, drilling the buffer stocks to take the shank.
There is no representation of any brake gear, although its omission is mainly hidden behind the full length stepboards, I will at some stage add some brake gear, once I purchase some suitable etches.

I drilled the axle boxes to take standard brass top hat bearings for Alan Gibson 12mm spoked wheels, wire handrails and lamp irons fashioned from Bambi staples were added. I made a floor from plasticard onto which I added some lead strip to bring the van weight up to approx. 45g to ensure good running. To affix the floor I first glued some plastic ‘T’ section to the inside of the van sides to provide a mounting location.

Following a dust of Halfords plastic primer the van was brush painted with Precision Paints P91 SR Freight Brown and P90 SR Venetian Red for the ends. Lettering and numbers were added using HMRS Pressfix SR Wagons transfer sheet 13 and then give a spray coat of Railmatch satin varnish to seal. Glazing for the end windows was glued into place before the floor was affixed.

For the time being standard slim tension lock couplings have been fitted using Peco Parkside P34 mounting blocks. It is now added the queue of items to be weathered.

I am sure there is potential for these vans to become a ready to run model one day, as interest in pre-grouping rolling stock is on the increase, hence this project being done as a bit of quick win.

 

Canute Road Quay, Making Quay Changes

Making Quay Changes #6 heading South East

1 Comment

This is the sixth in a series of ‘Making Quay Changes’ posts with the Canute Road Quay being transported to either a different location or era or both.  It follows my Making Quay Changes #1 post moving the scene Eastwards, and then back to Southampton with my Making Quay Changes #2 post but in the 1950s ,  #3 post set in the 1920/30s, #4 Being Industrious and #5 the 07 diesels take over. We now move to the South East with ex SECR motive power being utilised.

The P Class No.1558 from Hattons shunts at the quay

The T Class No. 1604 0-6-0T simmers in the background

The P class and T class meet on the Quay and shows the diminutive size of the P class

The LCDR T Class arrives as the quay.

The SER 0-40CT No. 1302 waits its next duty

The P class No. 1558 is about to depart

A busy moment at the quay

Although my usual modelling genre, as regular readers will know, is the Southern Railway between 1946 and 1949, however due to Canute Road Quay has very few visual references to either period or location (yes there are a couple, but hey…) It therefore allows me to change the location and era with different rolling stock, vehicles and details.

For this post we have stayed at Canute Road Quay‘s usual time frame but moved its location slightly. Having deliberately when building Canute Road Quay left the vehicles and other details such as crates, sack stacks and oil drums etc. loose, it enables them to be both be moved around, to give some variety in photographs, and or replaced with other items to different periods.

In this case Canute Road Quay‘s has been transported further to the South East, perhaps through squinted eyes it could on the Medway at Rochester, or or the Channel coast at Richborough Port or Newhaven Harbour perhaps…

The steam locomotives include the Hattons ex SECR P class 0-6-0T, an ex London, Chatham and Dover Railway Kirtey T Class 0-6-0T and even my South Eastern Railway 0-4-0CT crane tank makes an appearance.

The T class 0-6-0T were a class of ten locomotives introduced by the LC&DR (prior to the formation of the South, Eastern and Chatham Railway in 1899) between 1879 and 1893 specifically for shunting duties, with appropriately one of the class being initially used at Dover Docks. Although withdraws started in 1932 two of the class  1602 and 1604 (as my model) lasted until July 1951 and November 1950 respectively. My model is white metal and built from a Q Kit.

The SER 0-4-0CT crane tank number 1302 as per my model, was one of two built for the SER by Neilson in 1881. Like the T class she had worked at Dover Docks and also Richborough although she saw out most of her life at Lancing and Stewarts Lane. She was withdrawn in July 1949 and scrapped at Ashford. My model is built from a South Eastern Finecast white metal kit.

I hope you enjoy this post, the next ‘Making Quay Changes’ post with Canute Road Quay may or may not be set in its usual location, so once again, where and what era will it be…?