I realise some will concentrate on the time taken since these models were first announced some time ago by the Kernow Model Rail Centre, it has been well documented that the necessary research for the production of the CADS for these diesels with their complex multiple curved exterior shape has taken much longer than planned. When last year additional information came to light the development process moved on at a fast pace and now production of the first versions has now been completed. These are the first models that Kernow Model Rail Centre have worked directly with the factory on China on all aspects of the design, tooling and manufacture. Has the time taken been worth it… you bet it has!
In 1949 the frames for No. 10201, a 1Co Co1 loco, were laid at Ashford Works under the supervision of Bulleid. Before the first loco was completed the frames for 10202 were assembled. The last of the trio, No. 10203, was constructed in 1953-4 at Brighton Works.
The bolsterless bogie design was similar to that used on the Bulleid/Raworth electric locomotives, CC1 and 2, introduced in 1941, with similar bearing pads, wheels and the mounting of the bogies and brakes. To carry the additional weight an articulated pony truck was included, ingeniously guided by links fitted to the bogie front plate which also carried the buffers. The profile of the body sides was curved to match the profile of the Bulleid coaches of the time.
In February 1953 Brighton Works commenced assembly of the third member of the fleet, No. 10203, which was completed in March 1954. A number of technical differences were incorporated in this loco, the most significant being the installation of a higher powered engine developing some 2,000hp, rather than the 1,750hp of N0. 10201/2. After its commissioning trials, No. 10203 based at Nine Elms joined 10201/2 on the Waterloo-Exeter line where it demonstrated its superior output.
Initial trials of 10201 also took place on the London Midland Region, where all three would return in 1955, whilst on the LMR the chime whistle was also replaced by twin air horns. Whilst on both the Southern Region and the London Midland Region they worked alongside their slightly less power cousins the LMS Twins 10000 and 10001.
When built all three were painted in black livery with silver lining, including silver frames, whilst the centre of the roof section was matt black. After the locos were allocated to the LMR, Derby Works outshopped all three in BR standard locomotive green and replaced the waist height silver band with orange and black lining. The roof however was painted a really practical primrose yellow! This of course soon ended up a dirty black colour.
Near the end of their working lives they sported small yellow warning panels at each end.In November 1962 No. 10201/3 were taken out of service and stored at Derby, being joined by No. 10202 in early 1963. At the end of 1963 all three were withdrawn and unfortunately sent for scrap. This prototype information is an extract of my more detailed article on the SEmG group website here.
The first two models, No. 10201 and No. 10202 have now arrived in the UK and are starting to be sent out to those whom pre-ordered.
The initial four livery releases are as follows:
- K2701 Number 10201 in BR Black livery with early emblem
- K2701 Number 10201 in BR Black livery with early emblem
- K2703 Number 10203 in BR Black livery with early emblem
- K2704 Number 10203 in BR Green livery with late crest
An option for DCC Sound fitted K2701DS and K2702DS is also available, with sound by Legomanbiffo. The models of No. 10203 require slightly different tooling for both the sides and roof which is being worked on at the moment and will therefore at a later date.
I will on the whole let the pictures accompanying this post do the talking but read on for additional information. The models arrive in a very sturdy foam lined box in the Kernow Model Rail Centre house style with the locomotive held in the now usual plastic insert and sleeve. Overall the model has a good weight and matches the solid look of the prototype.
The model accurately follows the complex curves and tumbleholm of the prototype and has a wealth of rivet detail. Above each cab is the whistle (this will be replaced by air horns on the green version of 10203. Also included with the model is a complete set of closed half head signal (route discs) to allow any combination of open / closed discs and head signal codes to be achieved. Buffer beam hooks with and without dummy three link couplings are also included. Tension lock couplings are provided fitted into NEM pockets. The vacuum and steam heating pipes are factory fitted and do not interfere with the couplings.
Directional lighting for the head signal discs shines through the separate lenses within the open discs, but is fully blanked when the half discs are fitted. (Note the discs are a simple push fit and can be carefully prised off, but make sure you place a finger over the disc when doing so to prevent the disc heading off to be difficult to find on the floor!)
The models feature a large centrally mounted five pole motor with twin fly wheels, mounted on a die cast chassis block. Drive to each of the 3 main geared axles on both bogies is via articulated shafts. The bogies comprise of internal axle bearings and have both horizontal and vertical play to allow for a variety of track conditions. Electrical pick up is off all main driving axles.
I have found them to run extremely smoothly on at least three different layouts and test tracks complete with undulations and they haulage capability is exceptional and they have handled over twenty Hornby Pullman coaches with ease.
For those using DCC a 21 pin socket is provided and every model, even the non DCC fitted versions, include a 28mm 8 ohm, 4 Watt speaker!
Externally the finish is extremely good, an excellent satin black finish and crisp boundaries between the black and the aluminium silver lining and the aluminium silver roof. The fan grill on the roof is a very fine etching with a representation of the fan itself moulded below.
The flush glazing is very fine without any noticeable prismatic effect at the edges. Behind the body side windows is a representation of the engine block which if anything is slightly too close to the window but that is due to the fact that it is hiding the motor. Often when running in practice these side windows were in the down open position, I assume to give additional cooling, but this is not possible with the model. Windscreen wipers, lamp irons and handrails are separately applied and the latter also are where applicable the correct flat profile. The bogies themselves are a work of art, heightened by being painted as per the prototype in silver, including many separately applied details such as steps, covers, sandboxes, pipes and speedometer drive.
Full details on the variants available can be found on the Kernow Model Rail Centre dedicated webpage here.
As I said in the introduction paragraph I certainly feel the wait has been worthwhile and is sure to be a winner with Southern Region and London Midland Region modellers alike.
It has been a pleasure to assist the Kernow Model Rail Centre with this project from the outset.
9 thoughts on “First Bulleid Diesels from Kernow Model Rail Centre in 00 arrive and the wait has definately been worth it!”
I am also hearing favourable reports from some who have just received their locomotives – so I’m looking forward to mine!
Besides working the ACE I’m given to understand 10203 worked the Devon Belle to Exeter. Have you any information on this?
They did indeed work the ACE and the Golden Arrow but as far as I am aware and also backed up by the Kevin Robertson Southern Way Special No.1 about them there is no record yet located if any of the diesel types working the Devon Belle at any time or point.
Thank you Graham for this. It is exactly a year since I saw photos of the tooling and six months since I was able to run an early sample at the event in Taunton. I collected my two from Kernow’s at Warley and I am absolutely delighted with them. They could easily be in the Model of the Year category. Chris and his team (including you) and the manufacturer in China should be very proud of this wonderful model. They are stunning and run beautifully.
I am eagerly awaiting the arrival of mine, and I suspect the model will score highly in model of the year polls. I really believe this will be a game changer in the industry
Reblogged this on sed30's Blog.
Graham, Great review as always.
I was surprised to learn that Kernow went it alone with these models; with such a hit on their hands maybe they should do it again in future. My model of 10202 ran faultlessly from the box and the look of the thing is amazingly close to photos of the original. I know Mr Bulleid didn’t care much for ‘oil-engines’, but I rather like the look of his fine machine in model form.
Listen to me actually singing the praises for a diesel?!
Just received my model 10201. Bowled over by it! Never bought anything but steam up to now. But this is something else. Delighted to read that duties included milk trains to Templecombe. My layout is entitled Broad Temple and is a fictional junction of SR main line to West with the S&D so 10201can be accommodated.
First run in then fit DCC chip. Non sound to start with. Any recommendations?