Posts Tagged ‘Class 47’

Bachmann have today announced a brand new tooling version of the Brush Type 47 with tooling to allow to a wide range of sub class variations. Owing nothing to its predecessors, development of the new Bachmann Branchline Class 47 began several years ago and, using original drawings, diagrams, site visits and surveys of real locomotives, Bachmann has created a high specification model. Class 47 were often found on the Southern Region.

Bachmann Brush Type 4 Class 47 group shot

Specification includes:

Mechanism:
– Five pole, twin shaft motor with two flywheels providing drive to both bogies
– All axle drive
– Electrical pickup from all wheels
– Separate metal bearings fitted to each axle
– Diecast metal chassis block and bogie towers
– Diecast metal gearboxes, with gearing arranged for prototypical running speeds and haulage capabilities
– 16.5mm (OO gauge) wheels to NEM310 & NEM311 standards with authentic profile and detailing
– Detachable coupling pockets to NEM362 standards fitted to each bogie
– Designed to operate on curves of second radius (438mm) or greater
Detailing:
– Brush-built and Crewe-built locomotives portrayed
– Options for Original or Cut-Cab body style
– Bogies constructed from multiple components featuring full relief detail
– Rotating radiator fans, driven by an independent motor and gearbox, operated via a DCC function, or randomised when operated as part of the sound project on DCC and Analogue control (SOUND FITTED DELUXE models only)
– Tinted windscreen glazing (SOUND FITTED DELUXE models only)
– Separately applied metal detail parts, including grab handles, windscreen wipers and etched fan grilles
– Sprung metal buffers
– Each model supplied with a full set of decorated, model-specific bufferbeam pipework and accessory
parts
Lighting:
– Directional lighting, switchable on/off at either end on DCC or Analogue control
– Cab lighting, assigned to two DCC functions for separate switching of each
– Separately switched Engine Room lighting
– Authentic light colours and temperatures selected for each model based on era and application
DCC:
– Plux22 DCC decoder interface
Livery Application:
– Authentic liveries applied to all models
– Multiple paint applications employed on each model using BR specification colours
– Logos, numerals and text added as appropriate using multi-stage tampo printing using authentic typefaces, logos and colours
– Etched metal nameplates, symbols and plaques included where appropriate
Detail Variants:
Countless variations are catered for to allow accurate models to be produced depending on the locomotive
being portrayed, options include:
– Headcode panel arrangements from as-built to current-day
– Radiator Grilles
– Roof exhaust cover
– Steam Heat Boiler Ports/blanks
– Cab roof vents
– Cab mounted aerial
– Windscreen Wipers
– Cab Door Kickplates
– Headlights, both Scottish ‘Car’ and High Intensity versions
– ETH Equipment
– Multi-operation jumper sockets
– TDM jumpers
– Class 47/7 multiple working jumpers and cooling pipes
– Fuel and Water Tank arrangements
– Water Tank fillers
– Buffers
– Bogie-mounted cab steps
– Speedo Drives

Every Class 47 offered will be produced in three formats, with standard versions ready for use on analogue control out of the box and with a Plux22 DCC decoder socket.

An  excellent video has been produced by Bachmann looking at the new models in lots of detail and can be seen here.

With production of the first batch of models complete, details of the locomotives that will be arriving with Bachmann retailers this Autumn will be unveiled in the Autumn 2021 British Railway Announcements tomorrow 4th August.

Read Full Post »

The Kernow Model Rail Centre have today announced two new model livery releases based on Bachmann models both are now in stock and available for immediate delivery.

Kenow Mk1GUV S86804 with SURBITON - OKEHAMPTON CAR CARRIER roof-boards

Kenow Mk1GUV S86804 with SURBITON – OKEHAMPTON CAR CARRIER roof-boards

The first: for BR Southern Region western section modellers, is a BR Mk1 General Utility Van (GUV) as number S86804 in BR (SR) green livery complete with SURBITON – OKEHAMPTON CAR CARRIER roof-boards. The car carrier train ran between the 18th June 1960 and 12th September 1964 as a way of encouraging holiday traffic to the South West without the hassle of driving all the way there, especially avoiding the then notorious A30! The GUVs had end doors for loading / unloading, and those for car carrying also included hinged flaps to go over the tops of the buffers. They were originally delivered in lined maroon but the Southern Region soon repainted them green as per the Kernow Model Rail Centre release.

The other side of the Kernow Model Centre car carrier service GUV

The other side of the Kernow Model Centre car carrier service GUV

The standard formation of this train was eight (initially 7) of these roof board branded GUVs that could contain up to 32 cars (i.e. three or four cars in each GUV and once loaded the cars were held in position by a securing bar across the front and rear wheels of each car) along with usually three passenger coaches either of Bulleid or BR Mk1 origin. Referencing an Ivo Peters photograph taken in 1964, the three coaches at that time comprised of a Bulleid brake second open, Bulleid Kitchen/Restaurant (although for the first year of operation the resturant car was not provided and was an ordinary coach) and a BR MK1 second open.
The summer 1960 timetable showed the Down train leaving Surbiton, the end loading dock being located in the coal yard, at 8.03 am arriving at Okehampton  12.28 pm.  The GUVs were shunted off the passenger coaches to the loading dock at the sidings known as the ‘military sidings’ just to the west of Okehampton station. The corresponding Up working left Okehampton at 3.55 pm reaching Surbiton at 8.11 pm. The fare for a driver and car was £20 plus £4 13s for additional adult passengers.
This type of service was one of the forerunners of the ‘Motorail’ branded service that was introduced in 1966 lasting until 1995, initially with GUV’s but later often replaced by ‘Carflats’ and many of the GUVs were reassigned to parcels and newspaper traffic.

The model code number for this release is 39-273Z and is priced at £44.95 each

Kernow Class 47 D1670 'Mammoth'

Kernow Class 47 D1670 ‘Mammoth’

The second release is a class 47 locomotive D1670 in two tone green livery, named “Mammoth” as she would have run between 1965 and the early 1970’s. Although primarily a Western Region engine she was the locomotive that worked the inaugural ‘Clayfreighter’ service from Burngullow in Cornwall, then over Southern Region metals to Sittingbourne in Kent conveying clay slurry to Bowaters for the production of paper products.

The model code for this Class 47 is 31-650L and is priced at £149.99 for DC version, £169.99 for DCC fitted or £249.99 for a DCC sound fitted version. There is also an limited period additional special offer of the Bachmann Delabole Slate Presflo wagons Triple Pack being available for an additional £49.99, a saving of £30 per pack, provided they are bought and sent at the same time as ‘Mammoth’.

Read Full Post »

%d bloggers like this: