Posts Tagged ‘Kernow Models’

The Kernow Model Rail Centre, and therefore by default myself, have advised that the much-anticipated ex LSWR / SR Diagram 1541 10T Road Van has been approved for production. This follows the careful review and approval of the Engineering Prototypes received last year and the decorated samples of all ten of the versions being produced that were received last week.

First introduced by the London & South Western Railway (LSWR) in 1884 they were later classed as Southern Railway Diagram 1541. Almost 500 of these were built between then and 1905 making them the most numerous LSWR Goods Brake Van. Brake Vans with side doors through which parcels or other goods could be loaded were known as road vans.

LSWR Road Van Decorated livery samples Image

The decorated livery samples can be seen above, (note that some of the samples were only the body assembly). Approval for production has been given subject to a couple of minor amendments to the printing on the solebar cast plate for two of the SR livery versions, the spacing (Kernow correcting the Kerning – a designers injoke) of the numbers on the LSWR SB003B version and the solebar and buffer colour on three of the BR grey versions. 

LSWR Road Van Decorated livery sample SB003H Image

SB003H LSWR Road Van number 54611 in pre-1936 large SR lettered livery is illustrated and shows the correct SR Goods Wagon brown, lettering style and the solebar cast plate that has wording “SR” “54611” an “Eastleigh Works” all perfectly legible. 

KMRC anticipate production to commence at the end of March 2021 (following Chinese New Year) with shipment to the UK during May 2021 (subject to shipping availability) and hope to have them in stock for fulfilment of orders at the end May /early June 2021.

Details of all ten versions being produced can be found here.

Read Full Post »

As we are talking Southern Railway catering vehicles it might be worth sitting down and having some light refreshment to go with the read as things are going to get a little confusing and complex!

The Southern Railway even with its relatively short distances involved, when compared with some of the other railway companies, still provided full dining services by pairing a Kitchen dining car with a dining saloon on many of its services such as Waterloo – Exeter, Waterloo – Bournemouth / Portsmouth and Weymouth, Southampton boat train services and the Brighton to Plymouth, and some Victoria – Dover services. They could also be found on the though Cardiff, Newcastle and Birkenhead services off the Southern. These paired vehicles would either be inserted within the middle of longer coaching sets, especially for the through services off the Southern; or within a train made up from multiple shorter coach sets, such as on the West of England line.

The Southern Railway (and subsequent the Southern Region) contracted out its catering services: on the South Eastern and Central Divisions it was The Pullman Car Co, and the South Western Division was originally Spiers & Pond (the LSWR contractor) superseded by Frederick Hotels in 1930.

Hornby Southern catering vehicles since 2018

The R4816 Diagram 2656 Kitchen Dining First

The first newly tooled Southern Railway Maunsell catering versions were first introduced in by Hornby in 2018 and the subsequent ‘A’ versions currently available from Hornby are:
R4816 SR Maunsell Kitchen Dining First to Diagram 2656, No. 7869 and R4816A 7865 in unlined SR Green; and R4817 BR Maunsell Kitchen Dining First to Diagram 2651, with post 1939 / 1939 modifications, No. S7861S and R4817A No. S7858S in BR(s) Green.

Read my review of these models here.

The Diagram 2656 cars were built in 1932 and a later batch built in 1934 and other than the cooking equipment fitted were similar in body style to Diagram 2650. Hornby have chosen to produce these models in unlined olive-green which is totally correct for post 1940s condition.

One of these 1932 built vehicles No. 7864 (not to be confused with the Diagram 2652 Dining Saloon Thirds R40030 Number 7864 with the earlier use of the number being produced by Hornby in 2021 see below) is preserved at the Bluebell Railway and funds are actively being raised for its full restoration see here for details on how to contribute. 

The Diagram 2651 in BR(s) green represents one of the six, originally built in 1927, coaches post rebuilding around 1935 to include the characteristic recessed double doors. There were some slight bodyside differences between these and the subsequent 20 similar cars built in 1929 and 1930.

These catering vehicles would usually have been paired in service with Maunsell Diagram 2005 Open thirds numbered 1369 to 1400 such as R4537 Number 1400 or R4833 Number 1375 in SR Olive Green and R40101 number S1338S in BR(s) Green.

Hornby 2021 releases

The Hornby 2021 range sees the introduction of new tooling for two more Southern / BR(s) catering vehicles.

A Diagram 2652 Dining Saloon Third

[Edit] The as originally announced Maunsell Diagram 2652 Dining Saloon Thirds R40030 and R40030A as numbers 7864 and 7867 respectively representing them original condition in SR lined olive green. Six of these dining salon thirds were built in 1927 and they were in service actually paired with the first Maunsell Kitchen / Dining Firsts to Diagram 2651 that were also built in 1927 and numbered 7858-7863. Modellers licence would have been required  as this Diagram in original its 1927 form has not been produced by Hornby and therefore will have to be incorrectly paired with the Diagram 2656 Kitchen Dining First instead.

The main difference between the two diagrams is that the earlier Diagram 2651 did not originally have external door or the vestibule at the dining saloon end and have smaller kitchen window adjacent to the double doors. The first batch of the Diagram 2651 were later modified to include the end doors and vestibule (although the smaller window remained) these and the subsequent later builds, with differing sizes of windows, were built with vestibules were confusingly all to the same diagram number.

The six Diagram 2652 Dining Saloon Thirds only lasted in this from until 1930 when they were reclassed as Open Thirds and renumbered in the range 1363 to 1368.
[Edit] Hornby advised at the end of January that the models R40030 and R40030A to be numbered 1363 and 1366 respectively to the longer and more flexible usage 1930 to wartime period.
During the war all except No. 1367 were converted for Ambulance Train use during WWII. (see comments below).

Just to add to the complexity and confusion with the SR catering vehicles the Diagram 2656 having been built post 1932 took over the numbers 7864 to 7869!

A Diagram Third / Composite Dining Saloon

[Edit] Four of six, now reclassified Open Thirds were converted in July 1947 to Third / Composite Dining Saloons branded as ‘Restaurant Car’ to Diagram 2658 and numbered 7841-4 . These conversions have also been announced by Hornby as R40031 Maunsell Dining Saloon Third / Composite to diagram 2658 Number S7841S and R40031A Number S7843S in BR(s) Green.

These four were actually paired with the Kitchen / Buffet cars to Diagram 2659 that themselves were converted in 1947 from Diagram 2656 Kitchen / Dining firsts and not yet available in ready to run form. So therefore will have to be incorrectly paired with the Diagram 2651 Kitchen Dining First in BR(s) green instead. The other two were now fitted with 48 loose  2 +1 chairs and classified as First Class diners and numbered 7846/7 were were paired with newly converted Diagram 2661 Buffet cars for use on the reinstated ‘Night Ferry” service.

S7841S, previously numbered 7841, 1365 and 7866, is currently surviving awaiting full restoration at the Bluebell Railway.

Also announced for 2021 are further versions of the Kitchen / Dining Firsts as R40029 to [Edit]  Diagram 2655 Number S7998S and R40029A to Diagram 2656 Number S7955S in BR crimson and cream livery. These would be suitable to be paired with the Maunsell Diagram Open Third R4835 Number S1346S in crimson and cream that was released by Hornby in 2018! This version is still, at the time of writing, thankfully available from retailers such as our friends at the Kernow Model Rail Centre.

I did say it was a bit confusing, I hope this post has helped to clarify in some way…

Read Full Post »

The Kernow Model Rail Centre has today announced the release of exclusive commission from Bachmann Scenecraft in 00 of the ex London South Western Railway (LSWR) Type 3a, Grade two listed, signal box at Petersfield.

Petersfield Signal Box

A rear view of the Petersfield box

Setting the scene for the Petersfield signal box

The Petersfield type 3a signal box was built c1885 and is located on the Portsmouth Direct Line between Havent and Guildford (where of course the 2nd Kernow Model Rail Centre store opened in 2019).
Petersfield station was opened by the Portsmouth Railway in 1859, it was leased by the London & South Western Railway, who bought it outright in 1861. The station was extended and enlarged in 1864 to accommodate the traffic from the new Petersfield Railway to Midhurst.

The box is unique as it combines features of both ex LSWR type 2 and type 3 designs. It protects the Station Road level-crossing and it formerly controlled the junction of the Midhurst branch that was closed 1955. Although the closure of the goods yards occurred during the 1970s, the volume of passenger traffic and the need to guard the busy level-crossing has ensured that the signal box has remained in operation. It still contains a ten-lever Stevens (Railway Signalling Co.) frame and locking rack (c1880), together with a circuit diagram, blockshelf and block instruments.

Chris Trerise, Managing Director said: “The Petersfield signal box was a logical choice for us to commission due to its unique style and its location on the Portsmouth Direct Line local to our Guildford store” Chris continued: “We are pleased that our Guildford store has been able to remain fully open to our customers since the Covid-19 lockdown.

The exclusive to Kernow Model Rail Centre 44-074X Bachmann Scenecraft LSWR Signal Box – Petersfield costs £79.99  

This latest addition to compliments the LSWR Type 4 signal box “Bude” and also the LSWR Ground frame hut already exclusively available from the Kernow Model Rail Centre.

 

Read Full Post »

The Kernow Model Rail Centre have received the first Engineering Prototype (EP) from the tooling for the much-anticipated ex LSWR / SR Diagram 1541 10T Road Van. First introduced by the London & South Western Railway (LSWR) in 1884 they were later classed as Southern Railway Diagram 1541.  Almost 500 of these were built between then and 1905 making them the most numerous LSWR Goods Brake Van.  Brake Vans with side doors through which parcels or other goods could be loaded were known as road vans.

The CADs, based on a laser scan of the preserved example at the Isle of Wight steam railway, were approved for tooling earlier this year.
KMRC advised: “The first Engineering Prototype samples have been carefully evaluated and we are very pleased with how the EP has turned out. We are currently discussing directly with the factory a very small number of slight modifications before the next stage of livery samples can be produced. The production of the livery artwork is in progress.”

The pictures show the high level of detail and multitude of separately fitted parts including: flush glazing, hand rails, brake gear with pull rodding, step boards and lamp irons to accurately portray a number of different versions of the prototype.

These options include alternative buffer shanks with a ribbed option as fitted to preserved No. 56046 on the Isle of Wight steam railway and either straight or cranked step board supports, the latter as fitted to the majority of those transferred in 1925 to the Isle of Wight.

In light of further research, a small number of the available versions have been changed with corrected running numbers and liveries as BR Bauxite would not be appropriate for the available options of this road van.

Details of the ten versions can be found on the Kernow Model Rail Centre website here

Anyone wishing to amend their pre-order due to these changes can contact the Kernow Model Rail Centre either through the website or via telephone.

Note: the images show a version with a mix of the potential options and does not necessarily show an actual available version.

I hope that you will agree it is looking great.

Read Full Post »

I am delighted to announce that, after spending 15 years in the Road Safety and Traffic Management sector, spending some time out due to Covid 19 has resulted in a decision to change lifestyle, I am delighted, having already hinted a new role, to be taking up the newly created role of Development Manager with the Kernow Model Rail Centre (KMRC) working alongside Chris Trerise the KMRC Managing Director. I will officially start the role on 1st October.

Canute Road Quay has seen the addition of a semi permanent photographic light box in preparation for the new role

The new role is responsible for the research, development, and project management of our commissions along with some aspects of PR, Social media, website development and, once they are taking place again managing their presence at some exhibitions.

Obviously as regular readers will know I have already assisted KMRC with a number of their model commissions in the past (and a few for the future) so I am already familiar with their projects and the team.

My appointment provides KMRC with additional resource to develop and manage the wide range of their ongoing and planned projects.

Don’t worry the appointment will not affect this blog and or its future content.

Read Full Post »

Bachmann Europe advised at the start of the year, before the advent of Covid-19 a change to the way they make product announcements and that they would take place every quarter revealing new items that would be actually available in the following three months. The aim was that they would hold a product showcase event for members of their Collectors Club. Whilst Covid-19 has stopped the physical showcase event taking place Collectors Club members were able to get a sneak virtual preview of today’s announcement earlier this morning. Although no stand out new tooling has been announced we do see the launch of a new brand.

A new brand – EFE Rail

Bachmann Europe launch its all-new brand EFE Rail. The led by a new motorised version of the popular EFE 1:76 scale (OO) London Underground Tube Train. This much requested model is joined by a number of other Great British Model Railways to complete the launch range for EFE Rail.
The diecast model range Exclusive First Editions (EFE) has been part of the Bachmann Europe portfolio since 2016 and the new EFE Rail brand is an extension of this brand and sees an initial range includes numerous OO and N scale locomotives and wagons which have been produced in collaboration with third parties, such as Kernow Model Rail Centre and Heljan, to make these products accessible via Bachmann Europe Stockists for the first time.

The EFE Rail Motorised 1938 stock

The range in 00 initially includes six versions of the J94 0-6-0t  (reworked with a new coreless motor by The Kernow Model Rail Centre), four Class 35 Hymeks, and a number of JIA and PBA Wagons (also in conjunction with The Kernow Model Rail Centre.)
The N gauge range includes 12 versions of the Class 17 Clayton and 14t Mermaid side tipping wagon.
The majority of the new EFE Rail items are due to be released later this month with more to be added to the range in due course.

Bachmann 

The LMS 10000

The main new additions to the range include a class 40 with modified tooling and sound, and relevant to BR(s) modellers the missing LMS twin adding 10000 to run alongside the previously announced 10001 and will be available in BR Black with the early emblem.
A number of Class 66s, BR VBA and VDA wagons,   and also sound fitted Midland 1P 0-4-4 tanks (even as a southern modeller I can’t help but think they are delightful little engines!) top up the range.
Included within the August expected deliveries are the three versions of the Class 414 2-HAP 2-Car EMU 6061 BR (SR) Green, 6063 BR Blue & Grey and 4308 BR Network SouthEast that were first announced back in 2016.
Expected in October are the six versions of the 12t SR Box vans including both Plywood bodied, bauxite pristine and weathered; and 2+2 planking in LMS grey, BR grey weathered, bauxite weathered and GWR Grey.

Graham Farish

The Graham Farish range sees only the addition of two new livery Mk1 coaches including the Brake Composite in BR Intercity Charter livery. The brand new tooled LMS 8F will arrive this month along with the class 170/3 2 car DMU in South West Trains livery. The previously announced BR Mk1 Tourist 2nd open coach in BR(s) Green will arrive this quarter along with three versions of the SR 12t box van in SR Brown, LMS grey and BR bauxite.

Woodland Scenics and Scenecraft

Scenecraft N Gauge wooden engine shed

These ranges continue to grow with new additions to the woodland scenic range including grass tufts, a range of fencing types and different types of pre cabled wooden power poles and lines.
The N gauge Scenecraft range is further expanded with some scaled down versions of the 00 models and the addition of a wooden engine shed with cream and green paintwork that would not look out of place on a small Southern branchline.
The 00 ranges sees the reintroduction of the popular quayside stone walls.

The Bachmann announcement video can be viewed here and the full range and announcements can be seen on the Bachmann Europe website here.

Read Full Post »

Following the total sell-out of the Bulleid diesels within two months of delivery, the Kernow Model Rail Centre have today announced that in response to customer demand a further batch of Bulleid diesels has been arranged.  You can read my review of the first batch here.
This batch will feature the same four models as the first batch with two additional versions added.  The first four will be certified limited editions of 150 pieces and will be supplied with numbered certificates of authenticity and an appropriate named train headboard.  The headboard will be supplied loose in the box for customer fitment.  The remaining two models will feature 10201 and 10202 in BR Green with Late Crest and a grey roof for the first time and are not limited editions.

A view of 10201.

The other side of 10201.

The models available to order are: –

  • K2701A – 10201 in BR Black with early emblem and Bournemouth Belle headboard
  • K2702A – 10202 in BR Black with early emblem and Golden Arrow headboard
  • K2703A – 10203 in BR Black with early emblem and Atlantic Coast Express headboard
  • K2704A – 10203 in BR Green with Late Crest and Royal Scot headboard
  • K2705 – 10201 in BR Green with Late Crest (Grey roof)
  • K2706 – 10202 in BR Green with Late Crest (Grey roof)

10101 and 10202 in black.

As previously, these models will need to be paid for in advance to obtain the prices shown below. To reward the loyalty of our customers who previously pre-ordered these models a special offer will be sent to them direct.  If customers wait until they arrive they will pay a higher price, assuming they have not sold out prior to release.

The models will be £179.99 for DCC Ready or £309.99 for DCC Sound Fitted.  By paying in full immediately customers will save £10 (£15 for DCC Sound fitted versions).

Delivery is expected in the 1st Quarter of 2019.

Please visit the dedicated Bulleid Diesel page on the Kernow Model Rail Centre website here for further information or to place your order.

Read Full Post »

There has recently been a flurry of activity in the Ready to Run world from various manufacturers / model commissioners and this post is a quick update on a number of models that I  had the chance to take a look at, run and photograph at the Hornby Magazine Great Electric Train Show (GETS) on their Twelve Trees Junction layout, that I was helping to operate last weekend. Further posts giving a more detailed photographic review of some of the production models about to be delivered will follow in due course.

Hornby H Class

Hornby H class No 1518 on Twelve Trees Junction

First announced  in September 2016 as being part of their 2017 range the ex ex SECR / SR Wainwright H class 0-4-4 tank is progressing well and the first of the production samples can be seen pictured left. No 31518 in lined black with late crest is Hornby catalogue number R3539 and is also pull push fitted. She ran very nicely on Twelve Trees Junction layout over the GETS weekend. Also being released are R3538 as No. 308 in full SECR livery, R3450 as No 1234 in lined olive green and No 31551 as part of a train pack with pull push set 602.

Hatton’s P Class

A line up of three of the Hatton’s P Class tank livery samples

Although only announced last month progress on the twelve livery versions of their ex SECR / SR Wainwright P class 0-6-0 tanks is progressing at pace. They have now received in the last week the first livery samples and three of these can be seen left, with all able to seen on the Hatton’s website project update page here.

Shades of a 1960s LCGB railtour the P Class tank along with a Hornby Adams radial tank. The Kernow Gate Stock can also be seen in the background.

These are of course the first livery samples and a few tweaks are still to be made but the excellent attention to detail on these models can be clearly seen.

Shades of a 1960s LCGB railtour the P Class tank along with a Hornby Adams radial tank. The Kernow Model Rail Centre Gate Stock and O2 can also be seen in the backgroundThe full details of the available versions and pre-order details can be found here.
Although being livery samples these were unpowered we could not resist running one the samples as a double header to possibly represent a Locomotive Club of Great Britain railtour in the 1960’s.

Kernow Model Rail Centre, Gate Stock and Bulleid Diesels

Set 363 sits in the bay platform at Twelve Trees Junction

The ex London and South Western Railway pull push Gate Stock has featured on this blog often and now that they have been produced and awaiting shipment from China a small number have been air freighted to the UK for magazine review samples etc. The BR Lined Crimson set 363 (K1003) can be seen left. Three other livery versions are being produced, namely: K1001 Set 374 SR Lined Olive, K1002 Set 373 SR Malachite, and K1004 Set 373 BR Green (plated) See here for more details.

 

10201 hauls a rake of Pullman coaches with ease

Although announced some time ago, the necessary research for the production of the CADS for these diesels with their complex multiple curved exterior shape has as already documented taken much longer than planned. When last year additional information came to light the development process moved on at a fast pace and now production of the first versions has now been completed. The model ran exceptionally well on Twelve Trees Junction hauling a long rake of twelve wheel Pullman coaches with considerable ease, due to its good weight and a centrally mounted 5 pole motor with flywheels powering each bogie.

These models will each feature in a more detailed review post in due course so watch this space…

Both an example of the the Gate Stock, the Bulleid diesel 10201 and as an exclusive, their first running Engineering Prototype of the Western Region D600 series Hydraulics, also being produced by the Kernow Model Rail Centre will be running on the High Wycombe and District’s Hinton Parva layout this weekend at the Warners / BRM Magazine National Festival of Railway Modelling. if you are planning to attend come and say hello to the Hinton Parva team.

Read Full Post »

Regular readers of this blog will know that this time of year I tend to head south to where ‘summer comes soonest’, to coin a phrase from that well know Southern Railway Publicity poster.

I am soon heading very South (well about 4 and bit  hours and approximately 1600 miles in a plane south) for a blend of Spanish, African and Latin American influences,  exploration including a dormant volcanoes and a lavascape, rest, relaxation and hopefully some sun, possibly dark sandy beeches and sea too (might help you guess where). Normal service on this blog will therefore be resumed at the end of the month.  Before I get in to full holiday mode I just thought I would give a couple of brief updates on a few Southern related model items.

Engineering Prototype of the Dapol ex LSWR B4

Firstly, Dapol have now released images of the first assembled Engineering Prototype of their 00 gauge ex LSWR B4, announced back in 2014, This follows on the tooling test pieces that they had on display back in March at the BRM / Warners / MRC London Festival of Model Railways . So far the EP of just the one version of the 5 variants promised has been shown but I believe the other variations will follow.

Dapol B4 EP rear 3/4 view.

As a remind those variations so far announced are:

  • ‘Normandy’ (Number 96) as preserved by the Bulleid Society on the Bluebell Railway
  • ‘Caen’ (Number 90) Southampton Docks brown livery with Drummond Chimney
  • Number 88 in Southern black
  • Number 30082 in BR black, early emblem
  • Number 30096 in BR black, late crest

Secondly, The Kernow Model Rail Centre have received the second batch of livery samples of the their Gate Stock Pull Push sets and also the first main livery sample of the Bulleid Diesel numbers 10201 and 10202.
With respect to the Gate Stock there are still a number of tweaks being made to finalise the liveries.

The Kernow Model Rail Centre Bulleid Diesel 1st livery sample of 10201 . Picture courtesy and copyright KMRC

Although the first EPs of the Bulleid diesels broke cover, like the Dapol B4 tooling samples, back in March at the BRM / Warners / MRC London Festival of Model Railway as reported here, the livery application upon them had been undertaken by the factory from their own research rather than against approved livery artwork. The samples now received still have a few minor corrections to be made as the running numbers and BR early emblems are placed too high on the bodyside. The bogies require the axle boxes and springs painting black and the wheels will be the correct Bulleid pattern rather than the simple wheels provided for testing purposes. (The first engineering sample had the correct wheels).

Builleid Diesel 10202 livery sample. Picture courtesy and copyright KMRC

It should also be noted that these models have a centrally positioned 5 pole motor (not coreless) with two brass flywheels driving each power bogie via flexible drive shafts and having had the chance to test run the first EP they have a good weight to them, are quiet, smooth and powerful.
Kernow Model Rail Centre have also confirmed details of the final pricing and ordering details with respect to the pre-orders and this information can be found on the Kernow website here.

The 10203 versions will follow later.

Production slots for both the 10201 /2 Bullied Diesels and the Gate Stock are currently being finalised but it is hoped should be by the end of August, which neatly gets us back to summer and holidays how this post started.

Read Full Post »

Since my last post showing progress on Canute Road Quay, with respect to the concrete road area and inset trackwork along with making the grass ‘grow’  I have been busy completing the rest of the buildings and adding a mix of details.

The left hand front office building is yet to be affixed to the layout

The two main front buildings have been assembled from the excellent laser cut card components from LCut Creative these have now been initially painted and external details such as gutters and downpipes added from a mix of Peco LK-78 buifdings details pack and Wills SS46 Buildings Pack A. These buildings are not yet permanently affixed to the layout as I am still to add the internal details and also some lighting.

The main warehouse loading platform also has a representation of its underside wooden support beams. Photo taken before the gantry was fitted

I gave the LCut Creative buildings a coat of Humbrol grey acrylic primer prior to dry brush painting the brickwork using a pallet of  brick work colours from Precision Paints mixed with a little dirty black and also picked out slightly different brickwork such as the window brick arches a slightly lighter colour.

The gantry and A frame has been added to the right hand warehouse

The main warehouse loading platform has been made using Wills floorboard building sheets rather than the LCut Creative card items as I was making the platform quite long and the Wills plastic sheets are larger and stronger. This has been painted a weathered greyish brown colour.

To give access to the upper floor loading doors I have created a gantry hoist supported on the quayside by an ‘A’ Frame. The block and tackle / pulley would run on the smaller section ‘H’ girder mounted below the main cross girder, to either lift items to and from open wagons and or in theory the girder would be cantilevered over the quayside to lift items from moored vessels.

Another view of the warehouse and freelance gantry hoist

I have made this somewhat freelance design from scratch using two different sizes of brass ‘H’ section soldered together with some corner bracing details added from thin brass sheet embossed with a number of rivets.

The engine shed nestles in the roar corner of Canute Road Quay

The engine shed tucked away in the back right hand corner assembled from Skytrex Model Railways resin parts is now complete and suitably painted. The inside floor of the shed has been painted to represent a concrete floor and outside the shed a mix ash, using real ash from my wood burning stove, ballast and coal around the coaling platform, a Hornby Scaledale product,  have been glued in place using the usual method of diluted PVA glue. The water crane is a Kernow Model Centre commissioned SR style made by Bachmann Scenecraft.

USA tank No 72 crosses the quayside access road

A few people and black wing gulls have been suitably positioned around the layout from Langley Models, I have also used their etched drains and drain covers in suitable places. The SR barley twist post style gas lamps, from Gaugemaster, are yet to be wired in although the transformer, voltage regulator and input wiring is already place to do so.

The end of the right hand warehouse and loading platform

Other details items such as wooden crates, oil drums, sacks and fish crates have been added from cast plaster items from Ten Commandments suitably painted.

In my last post about Fisherton Sarum attending the Epsom and Ewell exhibition last weekend, Canute Road Quay makes its first almost public appearance this coming Sunday at an RMweb forum members event in Taunton. I would like to thank all those readers of this blog who came by Fisherton Sarum at the excellent Epsom and Ewell exhibition, it was good to speak to you all. On the whole from the layouts perspective the show went well despite a couple of electrical niggles, and I am looking forward to hopefully a good day with Canute Road Quay on Sunday.

An overall view of Canute Road Quay showing its curtrent state of progress

Read Full Post »

Older Posts »

%d bloggers like this: