It has been a busy period recent both in the arrival of some new ready to run models such as the Hatton’s ex SECR P class 0-6-0t, see my review here, and also their 14″ Andrew Barclay along with some time spent applying some finishing decals prior to weathering of a couple of kit built models namely the ex LBSC D1 0-4-2t and ex SECR S Class 0-6-0st. All these models still require a little work, including in some cases repainting and numbering and also weathering. Some of you may have seen some of these pictures before on my twitter feed.
With the arrival of the Hatton’s P class I took the opportunity to temporarily move the location of Canute Road Quay further South east and backdate to earlier than my usual 1946-49 modelling period, including some of my earlier style wagons that do not usually get an outing. It is one of the advantages of having such a layout that has no real identifiable items to identify the actual time period.
Eventually to suit my preferred time period: No. 754 will be repainted and numbered to become her later identity of No. 1557 in SR post war black livery, being one of the first two built with the slightly higher cab; whilst No. 1555 will be renumbered and lettered as No. 31555 with full ‘British Railways’ Sunshine lettering to represent her condition in early 1948.
The ex LBSC D1 0-4-2t is built from a South Eastern Fincast white metal kit. In fact a couple of examples of the class, including No. 2286 are know to have been used at Southampton docks for a while in mid 1930s up to WW2 so I am not actually stretching history too far by running my model of no. 2357 on Canute Road Quay albeit in a slightly later post war-time period, although she was technically allocated to Ashford at the time so she is obviously on loan.
The Hatton’s Andrew Barclay 14″ 0-6-0t will be modified to replace the existing buffers with wooden dumb buffers, have the WTT branding stripped off and suitably weathered to represent the condition of such locomotives that were used on some of the other lines and private wharfs that existed in and around Southampton area especially along the River Itchen.
I also have a Hornby Peckett on order, that I will likewise modify with wooden dumb buffers to give some further variety to locomotives at Canute Road Quay and differ from the standard RTR versions. I will post details of this conversion in due course.
The ex SECR S Class 0-6-0 saddle tank No. 1685 is also built from South Eastern Fincast white metal kit. The S Class was in fact only one locomotive due to a requirement for a heavy shunter at Richborough Port during WW1 and so was converted from a C Class 0-6-0 tender locomotive, after the war she was transferred to Bricklayers Arms until withdrawal in 1951. Like the ex LBSC D1 she must be on load to Canute Road Quay.
With Canute Road Quay’s appearance looming at the excellent Railex exhibition organised by friends at the Princes Risborough and District MRC, being held at Stoke Mandeville Stadium, Stadium Approach, Aylesbury, Bucks, HP21 9PP on the 26th and 27th May
I have started to return Canute Road Quay to its intended Southampton-ish location and the ex LSWR B4 0-4-0 and USA 0-6-0 tanks have returned along with suitable rolling stock and uncouplers etc all wheel cleaned, tried and tested in readiness for what I know will be an enjoyable weekend playing trains, shunting and talking.
If you are planning to visit Railex please make sure you come and say hello. I am stand 61, towards the right hand back corner (as you come into the hall) and will ably assisted by friend and fellow modeller Simon Paley for the weekend, he being the much younger looking operator!
I hope this post has been of interest and as stated above it does show the advantages of having a layout that is not an actual real location but endeavours to capture a flavour and also is not easily identifiable to a specific time period. I also intend to occasionally run in a later 1960s period with a few diesel shunters so more on this in a future post.
4 thoughts on “Canute Road Quay has a few visitors, including latest @hattonsmodels releases, but normal service is resumed after; and preparation for Railex”
Good luck at Railex
I’m sure Canute Quay will be a big hit there.
Although I don’t live in the UK I had the pleasure of attending Railex a number of years ago. David Lane & his colleagues put on a really good show.
Reblogged this on sed30's Blog.
Looking good, I look forward to playing with it over the weekend!