As promised a few posts ago when I first opened the box on my Wild Boar Models 45T Ransomes and Rapier Steam Breakdown Crane I thought it was about time I started “a whats on my workbench” type series of posts, so welcome to the first of my “Workbench Witterings“. I am sure I am similar to many modellers in that I have a large number of both unstarted and or unfinished projects on the go, so hopefully this series of posts might encourage me to actually get on with completing a few of the outstanding things currently on the go…
First up then is progress on the above mentioned 45T steam crane. Following the comprehensive instructions for this kit has been pretty easy and all the parts, a mix of 3D printed and brass etchings have good together really well and enabled painting to commence. Where the parts needed to simply clip in place or be held with brass wire acting as hinge pins such as between the weight relieving trucks and the main carriage or the crane body and the jib the they have done so very easily. The rest of the items including the etched brass detailing parts such as handwheels and cast name and information plates have been attached with superglue. The components were then primed using the the trusted Halfords plastic primer rattle can and then top coat brush painted using Humbrol matt 32 to represent the SR Grey livery as first carried by the SR steam cranes before they became black in early British Railways days. I took the opportunity last week to give her a test run on the High Wycombe and District MRS test track and all was fine, although a little additional weight has now been added to the underside of the main carriage truck. All that is needed to complete is the rigging from the fine cotton supplied as part of the kit.
Secondly is the repaint of a Hornby Bogie Van B from its original blue livery to malachite green, embarrassingly looking back at this blog post here I actually started this at the end of last year! Before reassembling the Van B I took the opportunity to replace Hornby’s representation of the roof vents. Although these are separate mouldings I felt they looked a little flat so replaced them with some suitable cast white metal ventilators from my coaching stock bits box (but I think there were originally obtained from Southern Pride Models) and then repainted the roof. She now awaits some weathering before she enters my operational fleet on Fisherton Sarum.
Now to kick off / complete a few more projects so watch this space…
3 thoughts on “Workbench Witterings #1 A 45T steam crane and a green Van ‘B’”
Isn’t Workbench Witterings somewhere down on the LBSCR near East and West Wittering….?
Nice to see reports on the modelling of others as it does spur one’s enthusiasm. Thank you!