Posts Tagged ‘Brake Van’

Rapido trains UK  have announced today (15/04), following a bit of a hint in one of their videos and me here, that they are producing the South Eastern & Chatham Railway Diagram 1558 six wheel brake van.

CAD Render of the D1558 Van original version

A detailed interior is included

A fully detailed underframe with full brake gear

The D1558 rebuilt version

Forty 6 wheel 20t brake vans were built in 1898 by the South Eastern and Chatham Railway to Diagram 1558, were heavily influenced by Midland Railway practice, these had an open veranda platform (i.e. with no roof, sides or end rail) at one end and a closed one at the other. In 1910, 50 more were built with close verandas at each end, between 1914 and 1920 the original vans were modified with two closed verandas. These modified vans were identifiable as had double top rails at the rebuilt end only.  All 90 vans entered Southern Railway stock and most passed into British Railways ownership. There were also variations in some of the framing, planking and handrails between the two built versions.

Rapido trains UK  have tooled two bodies to cover both the dual veranda vans built new in 1910 as well as the single-ended vans re-built that year and have announced ten initial versions:

  • 931001: No. 2033, SECR grey with black underframe
  • 931002: No. 2036, SECR grey
  • 931003: No. 55382, SR brown with red ends (large lettering)
  • 931004: No. 55389, SR brown with red ends (large lettering)
  • 931005: No. 55384, SR brown with red ends (small lettering)
  • 931006: No. 55366, SR brown with red ends (small lettering)
  • 931007: No. S55429, SR brown with red ends (BR lettering)
  • 931008: No. S55434, BR grey
  • 931009: No. S55371, BR grey
  • 931010: No. 80383, Engineer’s black

The RRP will be £39.95 or discounted at official retailers such as Kernow Model Rail Centre here.  The expected availability is early 2023.

The SER single ended version being produced for Rails of Sheffield

Rails of Sheffield have commissioned the original pre 1910 single end vans  to be produced in SER red/brown with red ends (ran into SECR days) and SECR grey (two running numbers).

These vans are a logical choice by Rapido trains UK and compliment there already arrived SECR Diagram 1355 seven-plank open, Diagram 1347 / Diagram 1349 five-plank opens and the previously announced Diagram 1426 van and the Dia. 1744 ballast wagons.

 

Read Full Post »

One of those occasions when looking for an item you come across something else purchased a while back and think I should really finish it… The other weekend I found my 3D print, purchased from Simon Dawson’s store on Shapeways (in those days when it was much cheaper than it is now…), of the 6 wheel ex SECR Diagram 1558 20 ton brake van, so I decide it would make a nice quick win project and be one less thing on the things to do one day list/pile…

The D1558 brake van is shunted at Canute Road Quay by an ex LCDR T class 0-6-0t

Forty 6 wheel 20t brake vans were built in 1898 by the South Eastern and Chatham Railway to Diagram 1558, these had an open veranda platform (i.e. with no roof, sides or end rail) at one end and a closed one at the other. In 1910, 50 more were built with close verandas at each end, between 1914 and 1920 the original vans were modified with two closed verandas. These modified vans were identifiable as had double top rails at the rebuilt end only.  All 90 vans entered Southern Railway stock and most passed into British Railways ownership. There were also variations in some of the framing, planking and handrails between the two built versions.

Buffers heads, handrails and lamp irons added

Brass bearings fitted and the ‘T’ section to support the weighted floor is added to the inside of both sides.

A dusting of Halfords plastic primer. The double top rail at the modified closed veranda end can be seen.

Painting and lettering complete, some etched brake gear will be added in due to finish

The one piece 3D print represents one of the first batch as modified with both verandas enclosed and correctly has the double end top rails at one end only. The print is pretty basic but was quite a clean print, has no floor, and is missing some of the fine top corner strapping detail. Handrails and lamp irons are thankfully not part of the print as I would have replaced these if they were. I replaced the printed bufferheads with finer turned metal 13″ versions, drilling the buffer stocks to take the shank.
There is no representation of any brake gear, although its omission is mainly hidden behind the full length stepboards, I will at some stage add some brake gear, once I purchase some suitable etches.

I drilled the axle boxes to take standard brass top hat bearings for Alan Gibson 12mm spoked wheels, wire handrails and lamp irons fashioned from Bambi staples were added. I made a floor from plasticard onto which I added some lead strip to bring the van weight up to approx. 45g to ensure good running. To affix the floor I first glued some plastic ‘T’ section to the inside of the van sides to provide a mounting location.

Following a dust of Halfords plastic primer the van was brush painted with Precision Paints P91 SR Freight Brown and P90 SR Venetian Red for the ends. Lettering and numbers were added using HMRS Pressfix SR Wagons transfer sheet 13 and then give a spray coat of Railmatch satin varnish to seal. Glazing for the end windows was glued into place before the floor was affixed.

For the time being standard slim tension lock couplings have been fitted using Peco Parkside P34 mounting blocks. It is now added the queue of items to be weathered.

I am sure there is potential for these vans to become a ready to run model one day, as interest in pre-grouping rolling stock is on the increase, hence this project being done as a bit of quick win.

 

Read Full Post »

A little while ago now Bachmann announced that it was adding Southern Railway 25t Pill Box style brake van to its range. These brake vans were seen all over the Southern network and currently the only 4mm model available is the Cambrian models kit.

Bachmann have now released the first image of an engineering sample for the brake van. The models in this range feature subtle differences that reflect the modifications and build style changes of the originals.  Click here to see the image, that I can not post directly to protect Bachmann’s copyright.

The SR Pill Box Brake Vans will be available from Bachmann  in both LH and RH Ducket versions and come with either standard or 2+ planked sides. They will also feature two styles of sandbox, open-framed or enclosed W Iron details, and moulded underframe detail for single or equal brake gear mechanisms. In addition, three versions of compartment door/window detail will eventually available.

These will I am sure be a popular and welcome edition to anyone’s Southern fleet and if this engineering sample image is to go by will be an excellent looking model.

Read Full Post »

%d bloggers like this: