Posts Tagged ‘SECR’

Following their announcement in April this year retailer Rails of Sheffield have delivered on their SECR Diagram 1424 8 & 10 ton 16ft Covered Goods wagon as part of their range of exclusive models.

No. 45455, Southern Railway brown, 1936 livery

Another view of No. 45455, Southern Railway brown, 1936 livery

No. S45358, BR freight stock grey

They have worked in partnership with a 3rd party UK based 3D printing specialist and also Dapol for the final assembly and decoration to manufacture these models using a new technique that features: A new, ultra high resolution, super strong aeronautical grade PU with a design life exceeding 25 years, a build process using the very latest light technology and is infinitely flexible for making all variants and low volume production potential for niche, products previously not capable of being produced economically for Ready To Run.

110 of these wagons were between 1904 and 1908, to an increased length of 16 feet during the Wainwright era. Later designated Southern Railway diagram 1424.
Several examples surviving to British Railways ownership, at least until 1956.  The models produced by Rails reflect the later SR and BR condition of the vehicles.

Initially three liveries have been produced, with two running numbers in each livery:

  • RL-1424-001 No. S45374, Southern Railway brown with BR lettering
  • RL-1424-002 No. S45382, Southern Railway brown with BR lettering
  • RL-1424-003 No. S45358, BR freight stock grey
  • RL-1424-004 No. S45427, BR freight stock grey
  • RL-1424-005No. 45374, Southern Railway brown, 1936 livery
  • RL-1424-006 No. 45455, Southern Railway brown, 1936 livery

The pair of SR 1936 livery versions together

The models faithfully replicate the prototype as per the later stages of their life with respect to the break gear and buffers, it means that the models in this form can not be back dated to liveries earlier than those offered.

There are a few points to note.
Being a version of 3D printing, despite the new to the hobby process, the finish when viewed very close up, is not quite as smooth as we would expect from an injection moulded plastic, however the aim of the process is to allow smaller production runs and produce models that would perhaps not be so economically viable via the more traditional process.
The models are fitted with pin point Alan Gibson wheelsets, but are not running in brass bearings so are not as free running as they could be.

The other side of No. 45455 showing the excess paint flow

The roof is a separate component and is a push fit into the body and may require a little to glue to hold it fully in place depending on the amount of handling and being white will definitely be improved with some weathering.
The decoration finish on the whole is OK but some of my versions in places showed a little excess paint flow. The lettering on the body sides is neatly printed however the solebars are missing any of the lettering that appeared on the prototype.

Rails of Sheffield should be congratulated on taking the step to introduce the new manufacturing process to our hobby and to enable the more niche, products previously not capable of being produced economically to be available to us Ready To Run. As the initial run of these models appears to have sold out I hope it will lead to more production runs, variations and prototypes, especially of course Southern related ones, being produced in due course.

Finally just in case you missed the announcement,  in October, Rails of Sheffield have also announced that they are to produce the ex SECR Wainwright D class 4-4-0 locomotive in conjunction with the Railway Museum, to follow the ex LBSC A1 / A1X ‘Terriers’ which are due very soon. Just for clarity the locomotives are being produced via traditional methods and not the 3D printing process of the wagon above. Perhaps someone in Sheffield has a soft spot for the South East of England…

 

Read Full Post »

Retailer Rails Of Sheffield have today announced that in partnership with Dapol and Locomotion Models that they are to produce the South Eastern and Chatham Railway Wainwright D Class 4-4-0 locomotive.

737 at NRM York

This is the first time that this locomotive has been produced in 00 in ready to run form. It has been produced using the preserved No.737 locomotive in association with the team of expert contributors from the museum and specialist modellers. A model of No.737 as preserved at the Railway Museum will be available via Locomotion Models.

Six versions are available to Pre-order through Rails of Sheffield:

  • 4S-027-001 Wainwright D Class SECR Green 4-4-0 Steam Locomotive No.488 (Pre Grouping Silk Finish)
  • 4S-027-002 Wainwright D Class Southern Lined Maunsell Olive Green 4-4-0 Steam Locomotive No.1730
  • 4S-027-003 Wainwright D Class BR Sunshine Black 4-4-0 Steam Locomotive No.31731
  • 4S-027-004 Wainwright D Class BR Lined Black Early Crest 4-4-0 Steam Locomotive No.31574
  • 4S-027-005 Wainwright D Class SECR Grey (Scraped Beading) 4-4-0 Steam Locomotive No.726
  • 4S-027-006 Wainwright D Class Southern Sunshine 4-4-0 Steam Locomotive No.1734

The models can be pre-ordered from today for a deposit of £30.00. Delivery is expected in Q3 2020 and their aim is to produce the model for less than £200 (subject to £ / USA $ exchange rates on delivery)

The first Engineering Prototype sample already here and is currently under review.

Models will have NEM coupling pockets, Next-18 Decoder socket, ‘pullout’ PCB and solderless speaker (plus provision for customer to fit Bass reflex speaker in tender).

The EP at today’s launch at the NRM (Picture copyright and courtesy A York)

Locomotives will feature a firebox flicker effect. Another feature is the drawbar between the locomotive and tender which is of a new ‘pinless’ type carrying the electrical connection. Dapol are the first manufacturer to use this type of drawbar on a British outline 00 scale locomotive. To couple the locomotive to the tender it is necessary to connect on it on a straight piece of track to enable them to be pushed together.

This has been an often requested locomotive, especially with No. 737 being preserved and pride of place in the Railway Museum and Rails of Sheffield have beaten a number of interested parties to the market. This adds a further SR related models to their range along with the SECR Diagram 1224 8 and 10 ton Covered Goods Wagon and of course the LBSC Terrier Locomotives.

Read Full Post »

No not as those whom know me might think, something to do with a prog rock band I’m a very big fan of (some say nerdy about), but a new range of detailed, but ‘generic’,  4 and 6 wheel ready to run coaches in a variety of styles and liveries, including initially ‘SECR’ and ‘SR’ options with LSWR to follow.

The Hattons announcement advised: “In the mid to late 1800s, the many operating companies in the UK were producing their own versions of the 4 and 6 wheel coach, which introduced many features onto the railways – lighting, continuous braking and even upholstered seats for all passengers. This led to them being a very common sight. Many designs consisted of only a handful of coaches, built to fill a specific need. These would also only wear the colours of the company they were built for. A good number were absorbed at the 1923 grouping and some found new leases of life on branches that were in need of simple stock to run on them. Some were taken into departmental stock or used by sheds and depots as simple stores vans and used until the 1950s.
Project Genesis faithfully represents the trains of the Era 2 & 3 period and brings modellers the opportunity to run a detailed train of coaches in liveries not normally seen in ready-to-run form.”

Examples of some of the batch one versions, running numbers will be chosen to fit with companies numbering systems

The following versions are proposed:

  • 4 wheel – 5 compartment
  • 4 wheel – 4 compartment
  • 4 wheel brake
  • 6 wheel – 5 compartment
  • 6 wheel – 4 compartment lavatory
  • 6 wheel brake

These will be used to represent a lot of different coaches when allied to the painting and printing they are applying to them. The individual styling has been made to include the most common features from some of the most widespread and longest lasting coaches.
There are also three types of wheelset and either oil lamp, gas lamp or electric light roof fittings to represent different designs produced by specific companies. Lit and unlit versions will be available. Full details of the specification can be found on the Hattons Genesis project page here

A variety of liveries are planned in the first batch that includes: SECR ‘Crimson Lake’ lined and SR Lined Olive. LSWR brown and tan and Longmoor Military Railway versions are planned for batch 2 and 3 respectively.

The estimated release for the first coaches is Q1 2021 and anticipated prices are £30 ea for unlit and £36 for lit version with bulk packs available. Full details of the range can be found on the Hattons project page here

Read Full Post »

Retailer Rails of Sheffiled have announced a new model in their planned range of exclusive models. Working in partnership with Dapol they have announced an 00 model of the ex South Eastern and Chatham Railway (SECR) 16ft Covered Goods wagon (box van) to Diagram 1424.

The ex SECR Diagram 1424 Covered Goods Wagon

110 of these wagons were between 1904 and 1908, to an increased length of 16 feet during the Wainwright era.  Later designated Southern Railway diagram 1424. Several examples surviving to British Railways ownership, at least until 1956.  The models produced by Rails reflect the later SR and BR condition of the vehicles.

These will be manufactured, totally in the UK and available in June this year, using a new technique that features: A new, ultra high resolution, super strong aeronautical grade PU with a design life exceeding 25 years, a build process using the very latest light technology and is infinitely flexible for making all variants and low volume production potential for niche, products previously not capable of being produced economically for Ready To Run.

Rails aim to fill the need for niche products, which simply would not justify a large production run. As they are produced in limited quantities, these vans are priced slightly higher than mass produced items, however, we feel the price reflects fantastic value for such distinctive models.

First EP of the Rails Diagram 1424 wagon. Picture copyright and courtesy A York

Initially three liveries will be produced, with two running numbers in each livery.  The following models are now available for pre-order;

  • RL-1424-001 No. S45374, Southern Railway brown with BR lettering
  • RL-1424-002 No. S45382, Southern Railway brown with BR lettering
  • RL-1424-003 No. S45358, BR freight stock grey
  • RL-1424-004 No. S45427, BR freight stock grey
  • RL-1424-005No. 45374, Southern Railway brown, 1936 livery
  • RL-1424-006 No. 45455, Southern Railway brown, 1936 livery

The price for a single wagon is £27.99, As an introductory offer, valid prior to the release of the wagons, that if you purchase two wagons you will receive a 5% discount.

Read Full Post »

The latest books hot of the press from my good friends at the Irwell Press are firstly two new publications in the excellent hardback “Book of the” series to cover the Southen Railway Moguls. The two volumes cover the initially ex South Eastern and Chatham and later Southern Railway, Richard Maunsell designed and produced 2-6-0 Moguls, the N and N1 Classes in Part One and U and U1 classes in Part Two. The third is a paperback version the Southern Workhorses No.1 Q Class 0-6-0s. Number two in the series of Southern Workhorses, still to be published, will be the Bullied Q1 class.
These three publications all follow the usual brilliant Irwell Press “The Book of Series” with historical background information about each class, their design, liveries and spheres of operation, photographs along, with particular details and photographs of each individual locomotive taken from their works records. the books are of the usual high standard of detail, information and photograph reproduction that we have come to expect from the Irwell Press at a reasonable price of £29.95 for the Mogul hardback versions and £15.95 for the paper Q class publication. As they say available from all good bookstores, and probably some not so good ones too!

Book of the Southern Moguls Part Two N and N1 classes

Book of the Southern Moguls Part Two U and U1 classes

Southern Workhorses No. 1 Q Class 0-6-0s

As with all the Irwell Press‘The Book of the” series they are invaluable for Southern Railway historians and modellers alike and well worth a read.

Further information about my N1 model, converted from a Bachman N class,  illustrated above can be read on my Talking Stock posts #12 here. My U Class model is built from a DJH kit, whilst the Q Class was built from a then Wills now South Eastern Finecast kit, sometime ago when I was in my early teens,  and is now running on its third chassis but still makes the occasional appearance on Fisherton Sarum!

 

 

Read Full Post »

As has been the case in previous years the team at Bachmann have provided the media, and Bachamnn Collectors Club members, with a mid-term update on work in progress across all the many stages of the manufacturing process from: research, Drawing office CAD, Tool room, Engineering Prototypes samples, livery artwork, production and being shipped. This post is a quick summary of the status of those models of a Southern Railway / British Railways Southern Region flavour. Although some items have been a long time coming, what can be seen is that catch up / progress is being made. Click on  the linked text to get more information on the details of each item from my post on the original announcement.

Bachmann 00

The EP1 of the 2HAP EMU. Picture copyright and courtesy of Bachmann.

The long-awaited ex LBSC H2 Class 4-4-2 Atlantic is very imminent, being released in two versions No. 2421 ‘South Foreland’ SR Olive Green and No. 32424 ‘Beachy Head’ BR Black Early livery. I have been fortunate to have a review sample in my possession and will be posting a review in the next week or so, watch this space.  Being produced alongside the H2 Class is the earlier H1 Class version initially as No. 39 ‘La France’ in LBSCR livery, which is also being shipped.

Within the drawing room are the many permutations, 5 types, of the Bulleid coaches along with the 4BEP (Class 410) EMU.

A front end close up of the 2HAP EP1. Picture copyright and courtesy A York

The 2HAP (Class 414) EMU is at the first Engineering Prototype (EP1) stage and as from the accompanying pictures is looking the part.  Three livery versions will initially be released being: BR green livery, BR blue & grey livery and Network South East livery. At the second Engineering Prototype stage is the 158/159 DMU with with the  3 car 159 Class to be released as No. 159013 in Network South East livery.

Graham Farish N

Recently shipped have been the four versions of the Bulleid coaches in BR(s) malachite green that together, BTK – TK – CK- BTK, create four coach set s84.

The lovely ex SECR Birdcage coaches, already released in 00, scaled down for N gauge and being released in SECR Wellington Brown, Southern Railway Olive Green and BR Crimson liveries are now approved for production.

The Class 450 and Class 319 EMUs are in the drawing office, whilst the 3 versions of the ex SECR C Class 0-6-0 as No. 271 SECR plain green livery,  No. 1256 Southern Railway Black livery and No. 31227 in BR Black livery with early emblem along with the Class 170 2 Car DMU No. in 170308 in South West Trains livery are at the artwork approval stage.

I hope you find this round up interesting and as stated above watch this space for a forthcoming review of the ex LBSC H2 Class 4-4-2 Atlantic.

Read Full Post »

It has been a busy period recent both in the arrival of some new ready to run models such as the Hatton’s ex SECR P class 0-6-0t,  see my review here, and also their 14″ Andrew Barclay along with some time spent applying some finishing decals prior to weathering of a couple of kit built models namely the ex LBSC D1  0-4-2t and ex SECR S Class 0-6-0st. All these models still require a little work, including in some cases repainting and numbering and also weathering. Some of you may have seen some of these pictures before on my twitter feed. 

SECR P Class 754 in WW1 grey livery

With the arrival of the Hatton’s P class I took the opportunity to temporarily move the location of Canute Road Quay further South east and backdate to earlier than my usual 1946-49 modelling period, including some of my earlier style wagons that do not usually get an outing. It is one of the advantages of having such a layout that has no real identifiable items to identify the actual time period.

ex SECR P Class 1555

Eventually to suit my preferred time period: No. 754 will be repainted and numbered to become  her later identity of No. 1557 in SR post war black livery, being one of the first two built with the slightly higher cab; whilst No. 1555 will be renumbered and lettered as No. 31555 with full ‘British Railways’ Sunshine lettering to represent her condition in early 1948.

ex LBSC D1 Class No. 2357

The ex LBSC D1 0-4-2t is built from a South Eastern Fincast white metal kit. In fact a couple of examples of the class, including No. 2286 are know to have been used at Southampton docks for a while in mid 1930s up to WW2 so I am not actually stretching history too far by running my model of no. 2357 on Canute Road Quay albeit in a slightly later post war-time period, although she was technically allocated to Ashford at the time so she is obviously on loan.

Andrew Barclay 14″ before being modified with wooden dumb buffers and weathered

The Hatton’s Andrew Barclay 14″ 0-6-0t will be modified to replace the existing buffers with wooden dumb buffers, have the WTT branding stripped off and suitably weathered to represent the condition of such locomotives that were used on some of the other lines and private wharfs that existed in and around Southampton  area especially along the River Itchen.
I also have a Hornby Peckett on order, that I will likewise modify with wooden dumb buffers to give some further variety to locomotives at Canute Road Quay and differ from the standard RTR versions. I will post details of this conversion in due course.

ex SECR S Class No. 1685

The ex SECR S Class 0-6-0 saddle tank No. 1685 is also built from South Eastern Fincast white metal kit. The S Class was in fact only one locomotive due to a requirement for a heavy shunter at Richborough Port during WW1 and so was converted from a C Class 0-6-0 tender locomotive, after the war she was transferred to Bricklayers Arms until withdrawal in 1951. Like the ex LBSC D1 she must be on load to Canute Road Quay.

ex LSWR B4 Class No. 100

With Canute Road Quay’s appearance looming at the excellent Railex exhibition organised by friends at the Princes Risborough and District MRC, being held at Stoke Mandeville Stadium, Stadium Approach, Aylesbury, Bucks, HP21 9PP on the 26th and 27th May 

USA Tank No. 70

I have started to return Canute Road Quay to its intended Southampton-ish location and the ex LSWR B4 0-4-0 and USA 0-6-0 tanks have returned along with suitable rolling stock and uncouplers etc all wheel cleaned, tried and tested in readiness for what I know will be an enjoyable weekend playing trains, shunting and talking.

USA Tank No.68

If you are planning to visit Railex please make sure you come and say hello. I am stand 61, towards the right hand back corner (as you come into the hall) and will ably assisted by friend and fellow modeller Simon Paley for the weekend, he being the much younger looking operator!

I hope this post has been of interest and as stated above it does show the advantages of having a layout that is not an actual real location but endeavours to capture a flavour and also is not easily identifiable to a specific time period. I also intend to occasionally run in a later 1960s period with a few diesel shunters so more on this in a future post.

Read Full Post »

Hornby first announced their intention to produce, as part of their 2017 rang,e the ex SECR Wainwright H class 0-4-4t back in September 2016 The first models, the SECR livery version,  duly arrived  October 2017 followed by the BR late crest lined black version in December 2017. I have now received my own model No. 1324 in SR olive green, hence me only just officially reviewing the model now.

A side view of R3540 in SR livery as 1324

The first 64 of the eventual 66 members of the class were first introduced by Wainwright of the South Eastern and Chatham Railway between November 1904 and 1909. The final two members of the class were eventually built under the auspices of Maunsell in 1915! They first appeared in Wainwright’s fully lined dark green livery followed by by Maunsell’s plain dark green livery, then the wartime dull grey livery up until 1923. In Southern Railway days they were in lined olive green which gave way for most members of the class to Bulleid black under wartime conditions and eventually British Railways lined black.
All but two members of the class (numbers 1264 & 1312 due to cracked frames) entered British Railways service with withdrawals taking place initially between 1951 and 1953 as a result of the spread of electrification and the remainder between 1959 and 1964.  A large number of the class were fitted with standard SR air control Pull Push gear from 1949 onwards to replace some of the aging D3, R &  R1 0-4-4 tanks. There were a number of slight differences within the class such as steam and Westinghouse braked versions, slight variations in coal and water capacities, while fifteen of the class had straight sided rather than flared topped coal bunkers.

A front 3/4 view of No. 1324

Hornby announced four versions as part of their 2017 range:

  • R3538 No.308 in fully lined SECR green livery
  • R3539 No. 31518 in lined BR black with late crests and, correctly, OHLE warning flashes and pull push fitted
  • R3540 No 1324 in SR Olive green livery (Post 1931 i.e. number changed from A324 to 1324)
  • R3512 No. 31551 in BR lined black with late crest as part of a train pack with Maunsell Pull Push iset  No. 602, comprising coach nos.1318 and 6681

As part the range for 2018 announced Hornby are to produce R3631 as 31265, representing one of the 15 members of the class with flat side bunkers (which is revised tooling new for 2018), in BR lined black with early crest. A further versions is being produced during 2018 as a limited edition for Hornby Collectors club members as R3648 No. 263 as she is persevered on the Bluebell Railway. It should be noted that No. 263 when introduced, in May 1905, she was one of the fifteen members of the class with flat sided bunkers and fitted with early type pull push gear. Sometime before withdrawal, by BR in January 1964, she was fitted with a version of the flared bunker style (not quite matching the rest of the class, see if you can spot the difference) and she has retained the style bunker in preservation.

A rear 3.4 view of No. 1324

Hornby have included within  their tooling the ability to produce a number of options including smokebox rivet style, steam and Westinghouse braked versions, flat and flared bunker sides along with those fitted with air control pull push gear and its associated small bore air control pipework down one side of the running plate.

The model is fitted with pick ups on all wheels (although some have found those on the bogie require a little adjustment to function correctly),  a five pole motor and brass flywheel and incorporates an 8 pin DCC socket. Body removal is quite simple, requiring the removal of four screws, however those wishing to a fit sound a small speak can be located within the bunker but this will require a little more complex dismantling of the body. Included with the model is an accessory / detail pack containing brake rodding, hand brake linkage, small NEM tension lock couplings and buffer beam pipe where applicable for the Pull Push fitted versions (which are neatly designed to mount  behind the bottom edge of the buffer beam.

A close up of No. 1324 looking into the cab

Hornby have certainly captured the look and dimensions of the prototype well and includes many separately applied parts including: pipework, handrails, lamp irons (front and rear) whistle, safety vales, smokebox dart, sprung buffers, sand pipes, a sliding cab roof shutter and steps. The cab features a fully detailed interior with leavers, control vales and dials all suitable painted. Both the front and rear spectacles are glazed with the rear ones fitted with glazing bars and the bunker coal load is removable.

Looking at home on Canute Road Quay, resting between shunting turns.

Livery application of all the released versions that I have seen is up to the usual very high standard that we have come to expect from Hornby. The selection of the SR Olive Green livery version as No. 1324 is convenient (possibly on purpose) as this loco retained this livery right until nationalisation before gaining BR lined black, so she never gained wartime SR Black with Sunshine letter so widens her period of operation (it makes a change for me not to have to repaint a model to suit my own 1946 to 1949 period, although I dare say a repainted one will enter the fleet at some stage  in the future).

Once  again Hornby are to be commended for the product of another excellent Southern model. Knowing that the earlier released  livery versions have already sold out with most stockists the H Class is bound to be a success as further livery variants are announced in future catalogues.

Read Full Post »

Hornby have today announced their full range for 2018 hot on the heals of yesterdays Bachmann announcement.  For this year’s range Hornby have gone to a single announcement rather than new toolings announced over the last few month either at Warley or via their Engineshed blog, possibly as a result of new broom(s) at the helm. The highlights  from a Southern Railway perspective being the brand new tooled Maunsell Lord Neslon class 4-6-0 and Maunsell 59ft Kitchen / Dining First catering vehicles. The now outdated Bachmann Lord Nelson will be easily surpassed by this new tooling that will incorporate variations to chimneys, smokeboxes, saddles and tenders. Last years H Class 0-4-0t also makes an appearance with revised tooling for the flat sided bunker.

Hornby’s Lord Nelson 851

The range also sees a welcome reintroduction of the 5Bel Brighton belle Set, in the 1960’s livery with small yellow warning panels, the model has also been updated with revised electrical connections between the cars. Also back in the range is the Devon Belle observation car.

The aim of this post is to round up the announcements that are of a Southern Railway / Southern Region interest and new for 2018, I have purposely not relisted those item previous announced and or still to actually appear. An indication of the planned release date via the Quarter system (eg [Q2] is also provided.

Locomotives

  • R3634 – SR 4-6-0 ‘Sir Francis Drake’ No. E851 Maunsell Lord Nelson Class in pre 1931 SR Lined Olive livery without Smoke deflectors, with snifting valves, original chimney and tender. [Q2]
  • R3635 – BR 4-6-0 ‘Lord Rodney’ No. 30863 Maunsell Lord Nelson Class in BR Brunswick Green with early crest,  Lemaitre chimney, short smokebox, piano front (Maunsell cylinders) smoke deflectors and high sided tender. [Updated]  [Q2]
  • R6303TTS – BR 4-6-0 ‘Lord Nelson’ No. 30850 Maunsell Lord Nelson Class in BR Brunswick Green with late emblem,  Lemaitre chimney, extended smokebox (Bulleid cylinders) smoke deflectors and high sided tender. DCC and TTS sound fitted [Q3]

    TTS Sound fitted 30850

  • R3617 – BR 4-6-2 ‘Elder Dempster Lines’ Rebuild Bulleid Merchant Navy Pacific number ‘35030’ in BR Brunswick Green with late emblem as she ran post rebuilding in April 1958. [Q2]
  • R3618 – BR 4-6-2 ‘Royal Observer Corps’ Rebuilt Bulleid West Country Light Pacific number 34050 in BR Brunswick Green with with late emblem as she ran post rebuilding in August 1958. [Q2]
  • R3631 – ex SECR 0-4-4T H Class number 31265, representing one of the 15 members of the class with flat side bunkers (revised tooling new for 2018), BR early crest. [Q3]
  • R3632 – BR 4-6-2 ‘East Asiatic Company’ ‘35024’ Merchant Navy (Original Air Smoothed) – BR Line Blue, early crest representing the condition she ran in between May 1949 and June 1951 when she gained Brunswick green. [Q4]

    Merchant Navy Pacific 35024 in BR Blue livery

  • R3638  – ‘Bideford’ Number 34019 Bulleid Battle of Britain Light Pacific – cut down 4500 gallon tender,  BR Green late emblem Post 1956 condition. [Q4]
  • R3507TTS – S15 Class number 30832 BR Black with early emblem DCC TTS sound. [Q2]
  • R3658 BR Class 50 Number 50033 ‘Glorious’ in Network South East livery. [Q4]

The ex SECR H Class  tank makes an appearance as an Exclusive model in the delayed Hornby Collectors Club now launched, R3648 Number 263 as preserved condition on the Bluebell Railway due July 2018. A big clue was of course her appearance on the Hornby Stand at the Warley show last month.

In addition to the Lord Nelson Hornby’s new locomotive tooling for 2018 comprises of LMS 4-6-2 Streamlined Princess Coronation Class and ex North British Railway, Holmes Class C/ LNER J36 0-6-0.

Train and Coach packs

  • R3606 – Pullman 5Bel Brighton Belle ‘Train Pack’, Unit 3053, Driving Motor Brake Parlour Third Car No. 92 and No.93.  1960s Umber and Cream, with small yellow warning panel [Updated] [Q3]
  • R4871  – Pullman 5Bel Brighton Belle ‘Coach Pack’, Unit 3053, Trailer Parlour First Kitchen ‘Gwen’, ‘Mona’ and  Trailer Parlour Third Car No. 85. 1950s Umber and Cream, early crest [Q3]

Coaches

  • R4816 –  SR Maunsell Kitchen Dining First Number 7869 Diagram 2656, in SR Green. [Updated] [Q4]
  • R4817 – BR Maunsell Kitchen Dining First Number S7946S Diagram 2651, in BR(s) Green. [Q4]

    Kitchen Diner First Diagram 2556 No 7869 c1940 image copyright and courtesy M King

  • R4860 – Pulman ‘J’ Type Devon Belle Observation Car Number 13. [Q4]
  • R4717A – SR 58′ Maunsell Rebuilt (Ex-LSWR 48’) Eight Compartment Brake Third Class Non-Corridor, SR Olive Green, Diagram 99 No. 2636 that formed set 42 with R4719A. [Q2]
  • R4718A – S R 58′ Maunsell Rebuilt (Ex-LSWR 48’) Six Compartment Lavatory Brake Third Coach, SR Olive Green  diagram 98 No. 2625 used as ‘loose’ stock. [Q2]
  • R4719A – SR 58′ Maunsell Rebuilt (Ex-LSWR 48’) Six Compartment Lavatory Brake Composite Coach, SR Olive Green, Diagram 418 No. 6401 that formed set 42 with R4717A.  [Q2]
  • R4720A – SR 58′ Maunsell Rebuilt (Ex-LSWR 48’) Nine Compartment Lavatory Third Class Coach, SR Olive Green, Diagram 31 No. 364 used as ‘loose’ stock. [Q2]
  • R4833 BR Maunsell Open Third, Number 1400 Diagram 2005 SR Olive Green . [Q4]
  • R4835 BR Maunsell Open Second, Number S1346S Diagram 2005 Crimson and Cream livery. [Q4]
  • R4836 – BR Maunsell 6 Compartment Third Class Brake Coach – BR(s)Green – High window style to diagram 2102, Number S2763S,  branded as set 230. [Q4]
  • R4838 – BR Maunsell 6 Compartment Third Class Brake Coach – BR(s)Green – High window style to diagram 2102, Number S2764S,  branded as set 230. [Q4]
  • R4839 – BR Maunsell Corridor 7 Compartment composite  Coach – BR(s)Green  – High window style to diagram 2301, Number S5673S,  part of 3 coach set 230. [Q4]
  • R4840 – BR Maunsell 4 Compartment Third Class Brake Coach – BR(s)Green – Low window style to diagram 2101, Number S3232S,  branded as set 399. [Q4]
  • R4841 – BR Maunsell 4 Compartment Third Class Brake Coach – BR(s)Green – Low window style to diagram 2101, Number S3233S,  branded as set  399. [Q4]
  • R4842 – BR Maunsell Corridor 7 Compartment composite  Coach – BR(s)Green  – Low window style to diagram 2301, Number S5145S,  part of 3 coach set 399. [Q4]
  • R4834 – BR Maunsell Corridor 8 Compartment Corridor second Coach – BR(s)Green  – High window style to diagram 2001, Number S1113S. [Q4]
  • R4837 – BR Maunsell Van B S261S in BR (S) Green. [Q4]

Wagons

  • R6839 – BR ex SR Cattle truck –  Bauxite livery, No. S53904, – Maunsell diagram 1529. [Updated]  [Q2]
  • R6839A – BR ex SR Cattle truck –  Bauxite livery, No. S53908, – Maunsell diagram 1529. [Q4]
  • R6840 – BR ex SR Cattle truck –  Bauxite livery, No. S52345 – Bulleid diagram 1530. [Q3]
  • R6858 – 3 plank wagon SECR livery No. 10756 [Q3]

Hornby’s new wagon tooling for 2017 comprises of a LNER 20 ton  ‘Toad’ B and E brake van.

The full Hornby 2017 range can be found on the Hornby website here or RMweb here

Read Full Post »

There has recently been a flurry of activity in the Ready to Run world from various manufacturers / model commissioners and this post is a quick update on a number of models that I  had the chance to take a look at, run and photograph at the Hornby Magazine Great Electric Train Show (GETS) on their Twelve Trees Junction layout, that I was helping to operate last weekend. Further posts giving a more detailed photographic review of some of the production models about to be delivered will follow in due course.

Hornby H Class

Hornby H class No 1518 on Twelve Trees Junction

First announced  in September 2016 as being part of their 2017 range the ex ex SECR / SR Wainwright H class 0-4-4 tank is progressing well and the first of the production samples can be seen pictured left. No 31518 in lined black with late crest is Hornby catalogue number R3539 and is also pull push fitted. She ran very nicely on Twelve Trees Junction layout over the GETS weekend. Also being released are R3538 as No. 308 in full SECR livery, R3450 as No 1234 in lined olive green and No 31551 as part of a train pack with pull push set 602.

Hatton’s P Class

A line up of three of the Hatton’s P Class tank livery samples

Although only announced last month progress on the twelve livery versions of their ex SECR / SR Wainwright P class 0-6-0 tanks is progressing at pace. They have now received in the last week the first livery samples and three of these can be seen left, with all able to seen on the Hatton’s website project update page here.

Shades of a 1960s LCGB railtour the P Class tank along with a Hornby Adams radial tank. The Kernow Gate Stock can also be seen in the background.

These are of course the first livery samples and a few tweaks are still to be made but the excellent attention to detail on these models can be clearly seen.

Shades of a 1960s LCGB railtour the P Class tank along with a Hornby Adams radial tank. The Kernow Model Rail Centre Gate Stock and O2 can also be seen in the backgroundThe full details of the available versions and pre-order details can be found here.
Although being livery samples these were unpowered we could not resist running one the samples as a double header to possibly represent a Locomotive Club of Great Britain railtour in the 1960’s.

Kernow Model Rail Centre, Gate Stock and Bulleid Diesels

Set 363 sits in the bay platform at Twelve Trees Junction

The ex London and South Western Railway pull push Gate Stock has featured on this blog often and now that they have been produced and awaiting shipment from China a small number have been air freighted to the UK for magazine review samples etc. The BR Lined Crimson set 363 (K1003) can be seen left. Three other livery versions are being produced, namely: K1001 Set 374 SR Lined Olive, K1002 Set 373 SR Malachite, and K1004 Set 373 BR Green (plated) See here for more details.

 

10201 hauls a rake of Pullman coaches with ease

Although announced some time ago, the necessary research for the production of the CADS for these diesels with their complex multiple curved exterior shape has as already documented taken much longer than planned. When last year additional information came to light the development process moved on at a fast pace and now production of the first versions has now been completed. The model ran exceptionally well on Twelve Trees Junction hauling a long rake of twelve wheel Pullman coaches with considerable ease, due to its good weight and a centrally mounted 5 pole motor with flywheels powering each bogie.

These models will each feature in a more detailed review post in due course so watch this space…

Both an example of the the Gate Stock, the Bulleid diesel 10201 and as an exclusive, their first running Engineering Prototype of the Western Region D600 series Hydraulics, also being produced by the Kernow Model Rail Centre will be running on the High Wycombe and District’s Hinton Parva layout this weekend at the Warners / BRM Magazine National Festival of Railway Modelling. if you are planning to attend come and say hello to the Hinton Parva team.

Read Full Post »

« Newer Posts - Older Posts »

%d bloggers like this: